User Tag List
Thanks: 0
Likes: 0
Results 1 to 5 of 5
Thread: 2670 my slides
-
11-26-2019, 02:57 PM #1
- Join Date
- Mar 2019
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
2670 my slides
We have a 2150rb it has the schwintek slide system. We will be ordering the 2670mk it has the schwintech on the right side on the left side there is the rack and pinion type6 slide. What is the reason they didn’t put rack and pinion on both sides, schwintek can be a headache when it gets out of sync.
-
03-07-2020, 09:39 AM #2
- Join Date
- Feb 2018
- Location
- Prescott, AZ
- Posts
- 110
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Not sure of the reason but I own the 2670MK and had significant problems with the schwintek slide binding. It was at the dealer for a long time as Grand Design went back and forth with the dealer.
The side racks were replaced and now working fine. Easy fix if it goes out of sink which happens if you do not fully extend then try to retract.
-
03-09-2020, 05:47 AM #3
- Join Date
- Aug 2019
- Location
- Lewis Center, OH
- Posts
- 136
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I had read somewhere that the kitchen slide is heavy to the point that it requires the schwintek.
Buckaroo
2020 Imagine 2670MK
2017 Tundra DC 4WD TRD
-
03-15-2020, 01:54 PM #4
- Join Date
- Jul 2019
- Location
- Virginia Beach, VA
- Posts
- 133
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Scott & Fonda
2015 F-250 SuperCrew SRW, 6.7L TD
2020 Imagine 2670MK.........Equal-i-zer 1400#
Kayaks: Perception Expression 11.5 and Carolina 12
Bikes: Specialized S-works Amira, Felt Z95, DelSol Lxi 6.1, Electra Townie
Virginia Beach
-
03-16-2020, 08:00 AM #5
- Join Date
- Jul 2016
- Location
- Henrietta, NY
- Posts
- 719
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Yeah, our 2650 has Schwintek slides on both sides. The big slide with the fridge and couch always sounds like it's straining when opening or closing it. The small slide is fine.
2019 F-250 Supercab
2017 Imagine 2650RK
Trying to get trailer camera wire...
Yesterday, 10:01 PM in Electronics