User Tag List
Thanks: 0
Results 21 to 21 of 21
Thread: Washer Dryer
-
02-13-2020, 02:57 PM #21
Mine was not a toy hauler, it is a 311BHS. I did a major mod on the unit, The dryer vent runs down the back to the floor. In my unit, outboard of the frame, between the frame and the wall, there was plenty of room to cut a 4 and 1/4 hole. 4 inch will be to small, and put a vent in the floor. You cannot see the vent from the outside, it is blocked from view by the skirting. Works great.
https://www.homedepot.com/p/GE-4-in-...85DS/202049948
The white part facing down and the opening to the rear...Last edited by phonemannn; 02-13-2020 at 03:04 PM.
2017 F350 Lariat, Dual rear wheels
2017 GD 311BHS
New from California
Today, 09:28 AM in Welcome Mat | New Member Introductions