Reflection 311BHS with Demco Hijacker Autoslide

[av8er79]

Is anyone using a Demco Hijacker Auto slide to pull Reflection 311BHS or similar 5th wheel model with a RAM 6'5" bed? I would also like to hear from those of you with that RAM bedsize that is not using a auto slide.

[VTX-AL]

Yup... towing a 303RLS with that autoslider, with a '17 Ram 3500

[av8er79]

How sharp have you had it? How close was it to the cab? This is my 1st 5th and it has me nervous.

[VTX-AL]

Not really sure exactly how close I have actually had it in actual degrees, but when the Demco is at it's fully rearward position there is plenty of room to turn as sharp as you would ever want to with plenty of clearance between the corners of the 303RLS and the cab of the Ram 3500 truck. The only negative comment I would have about the Demco is the close alignment tolerance between the truck and trailer when hooking up - about +/- 10 degrees or so. Here is a video which demonstrates this quite well :
https://www.youtube.com/watch?v=9P9WKmxQsG4