User Tag List
Thanks: 0
Likes: 0
Results 1 to 5 of 5
Thread: bent foot on stabilizer
-
03-10-2020, 01:26 PM #1
bent foot on stabilizer
Hey folks, while auto-leveling today, the mid stabilizer hit some soft mud and bent the foot, the flat disc on the bottom. How easy is it to replace and where do i get the part. Thanks
-
03-10-2020, 03:27 PM #2
- Join Date
- Nov 2016
- Location
- Florida
- Posts
- 2,822
- Mentioned
- 30 Post(s)
- Tagged
- 0 Thread(s)
Mine back one bent once. I took the pad off, out it in a vice and bent it back.
If that doesn’t work a call to Lippert at 574-537-8900 should be able to buy a new padJerry & Linda
Emma & Abby our Mini Golden Doodles & JR our Amazon Parrot
2017 Reflection 337RLS, Build Date 01/2017, Titan Disk Brakes, Goodyear G614s 235/85/16 G Rated tires
2022 F-450 King Ranch Ultimate, 4,868 lb Payload, Bedrug Bedliner, Andersen Ultimate II Aluminum 5th wheel hitch
http://visitedstatesmap.com/image/FLGANCSCsm.jpg
-
03-10-2020, 04:09 PM #3
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,118
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
They're readily available on Etrailer and Amazon.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
03-11-2020, 09:57 AM #4
- Join Date
- Feb 2018
- Location
- SW Colorado
- Posts
- 2,693
- Mentioned
- 42 Post(s)
- Tagged
- 1 Thread(s)
Or - find a good welding shop and have it bent back and reinforced.
2018 Reflection 150 Series 220RK 5th wheel with 6K axle upgrade. B&W 25K OEM Companion, Steadyfast system, 2022 F350 SRW 6.7 King Ranch 8' bed, Trailer reverse lights, rear spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, and Solar
-
03-11-2020, 10:36 AM #5
- Join Date
- Dec 2016
- Location
- Somewhere, USA
- Posts
- 2,616
- Blog Entries
- 3
- Mentioned
- 30 Post(s)
- Tagged
- 0 Thread(s)
There is a big bolt on the underside of the pad. Some RV dealers stock them, if not they can order one. If you look closely at mine you will find one different from the others. If you don't have it with you for the match check the diameter.
I am kind of a red neck. I would put a 2x4 under the lower bent part and run the jack down in manual mode on top of it and bend it back. It will be wrinkled, but it will still work.Dallas
2017 Momentum 376TH, 2019 Ford F450, Dual Rear Wheel, 4x4, diesel.
2015 Harley-Davidson Street, XG750
best strategie on keeping unit...
Today, 03:44 AM in General Discussion