Furrion Microwave/Convection Light Bulbs

[MichiganMarty]

Has anyone changed out the incandescent light bulbs for LED's yet on their Furrion Microwave/Convection oven's yet?

These would be the two bulbs that light up the stove top below, and the bulb that lights the interior of the microwave/convection oven.

What did you use? what was your source? Hardware Store? Home Depot? On-line/Amazon?

What are the bulb numbers?

Thanks in advance!

[Grandesigner]

Hey Marty,
Did you ever solve this problem?

[Second Chance]

I didn't see this question the first time around... sorry. I think the reason incandescent bulbs are used in all ovens is because of the heat. I don't think the circuit board or chips associated with LEDs would hold up in those conditions.

Rob

[Grandesigner]

Good point, but I'm only thinking about the ones on the outside that light up the stove top.
Maybe these will work?
https://www.amazon.com/gp/product/B0...C99C26E9&psc=1

[Dutchman2]

Good point, but I'm only thinking about the ones on the outside that light up the stove top.
Maybe these will work?
https://www.amazon.com/gp/product/B0...C99C26E9&psc=1

I purchased from Amazon and installed just before our last trip. Happy wife after the install as the lights offer additional brightness over the stove top. After being on for over an hour very little heat noticed vs. the original bulbs. Good upgrade and install could not be easier. I did put a dab of silicone on the bulb and housing to reduce vibration potential when traveling.

Dutchman2

[Jims94vmx]

Did mine a year ago. Brighter and less energy when boondocking. Hardware store. Take a bulb with you to get correct one.