F350 + 310GK + BW Companion

[orbsah]

Hi all - I just got my hitch in preparation for our 310 to arrive next month. Could anyone with this combination please let me know where you set your hitch height and fore/aft adjustment? Just looking for a good starting point to possibly save an iteration. Details on what I have is in my signature. Thanks, -Jeff

[CoChris]

Hi all - I just got my hitch in preparation for our 310 to arrive next month. Could anyone with this combination please let me know where you set your hitch height and fore/aft adjustment? Just looking for a good starting point to possibly save an iteration. Details on what I have is in my signature. Thanks, -Jeff

I run our hitch in the middle (17-¾“) height and aft (1” in front of rear axle) position. Gives 6” clearance to bed rail (front) and 5” clearance to tail gate. I think the 2020 Solitudes use a MorRyde pin box, rather than the Rotoflex pin box on ours. I do not know if this will make any difference. Rig in signature.

Chris

Edit: I just realized your TV is a dually. Ours is a SRW and I think the SRW sits a little (1"?) higher. When hooked up, our TV is fairly level (rear is 0~1/2" higher then front) and trailer is ~1" nose high. With the trailer, people and camping "stuff", our truck squats about 3~3-1/2" in the rear and no change in the front. I suspect your dually may squat a little less (depending on how you load the trailer). I think my setting would be a very good starting point for you.

[orbsah]

Thanks Chris