User Tag List
Results 1 to 10 of 14
Thread: converter/charger
-
03-17-2020, 11:11 PM #1
- Join Date
- Feb 2015
- Location
- Clarkston WA
- Posts
- 365
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
converter/charger
Getting ready to install 2-lithium batteries. We have a 2015 369 Solitude, do we need to change out converter/charger, if so any recommends?
Thanks!Becky, BoBo and Mike
2015 Solitude 369RL
2020 GMC 2500 Duramax
Anderson Ultimate 5th wheel hitch
-
03-18-2020, 12:41 AM #2
- Join Date
- Aug 2016
- Posts
- 162
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Yes.
If your investing in lithium, get a high quality inverter/charger.
There are several on this board that have lithium. Do a quick search and you'll find what you're looking for.
-
03-18-2020, 09:41 AM #3
- Join Date
- Nov 2017
- Location
- Toronto, Canada
- Posts
- 1,974
- Mentioned
- 54 Post(s)
- Tagged
- 0 Thread(s)
Yes, to improve charging time and to prolong the life of your batteries you should replace the converter.
This one seems to be popular among other owners who have done this:
https://www.amazon.com/dp/B07DP3X16F...v_ov_lig_dp_it
I don't have one, no personal experience. I have nothing at all to gain by recommending it. Just the messenger here.Mark - 2018 Solitude 310GK - 2017 F-350 diesel SRW short box - Pullrite Superglide hitch
-
03-18-2020, 10:56 AM #4
- Join Date
- May 2019
- Posts
- 257
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Yup that's the one I bought and installed. FYI... these were the things I did not know before installing:
1. Biggest wire that fits in the converter is 4g welding wire
2. My plan was to leave the old converter installed and just turn off the circuit breaker. Found out all the bedroom plugs were on that circuit. So I completely removed the old converter. Then installed the new one in the front bay by the batteries.
3. Drilled a hole and fed the plug thru to an AC receptacle in the main pass thru area.
4. Takes about 1 hour to charge both of my Lion 105AH batteries 20%.
Hope that helps...
-
03-18-2020, 12:14 PM #5
- Join Date
- Nov 2017
- Location
- Toronto, Canada
- Posts
- 1,974
- Mentioned
- 54 Post(s)
- Tagged
- 0 Thread(s)
Let's tag @dirtclod (<-- that does it!) so he/she gets a notification and sees your advice.
Mark - 2018 Solitude 310GK - 2017 F-350 diesel SRW short box - Pullrite Superglide hitch
-
03-18-2020, 10:40 PM #6
- Join Date
- Oct 2015
- Location
- Springfield, Oregon
- Posts
- 2,330
- Mentioned
- 17 Post(s)
- Tagged
- 0 Thread(s)
Backpacker and tent camper all my life, including BSA as a kid and adult.
Motorcycle trips across the USA with a tent - 1978 to Present.
02-10-2005 - 2002 F350 SWD PSD and 2003 Citation 10'8S mostly for Crater Lake Ski Patrol.
10-29-2015 - 2016 Grand Design 380TH. It's HUGE compared to a camper.
10-19-2018 - traded truck for a 2016 Ram 3500 DRW Laramie CC 4 X 4 Long Box.
03-16-2019 - Traded Momentum for a New 2018 374TH-R Solitude
FULL TIME RV'er Nov 2021
-
03-19-2020, 07:00 AM #7
- Join Date
- May 2019
- Posts
- 257
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Ken, I have a 2018 Reflection 220RK 5er. In addition to the new converter and Lion batteries, I also installed a 2000W Aims inverter.
I follow a guy on Youtube who does all this DIY on his 5th wheel. His set up and explanations were easy for me to understand and follow. The channel is Love Your RV. I somewhat mirrored his setup with most of my electrical upgrades/additions in the front bay. But that is only a partial reasoning...
I planned on leaving the old converter installed with the breaker turned off. Plus when I looked at the space available where the old converter was, it looked really tight and may not work for the new converter. Also, I had read about using proper guage wiring for high amperage throughput. Length of the wire played a factor for efficiency. So having evrything together made sense to me. And finally, working inside the OEM junction and breaker box was not something I looked forward to.
So that was the bulk of my pre-project logic. Here is what I discovered during the project:
1. Fully charge each battery individually before installation. This was easily done using 4g welding cable and the new converter.
2. Have a new battery box planned out and ready before starting. Mine was kind of done on the fly.
3. When ordering the cables and connectors understand all the parts in play. Some of my connectors had openings that were too big for the battery posts, inverter posts, etc.
4. Use rubber protected tools and gloves. Don't ask...
5. Have all your fuses and shut offs planned in advance. This may affect the location of your equipment.
6. Use positive and negative buss bars to connect wiring. I ran all my new equipment directly to the batteries. This created a bit of a 'bird's nest' situation. It works, it's safe, but not ideals. Someday I will fix that...
Here are my thoughts after project completion:
1. Working in the OEM breaker box was not difficult. (Had to remove old converter after all.)
2. Working in the front bay was MUCH easier than trying to install everything in garage pass thru.
3. Putting the converter in the front bay gave me the option to plug it in to my 400W truck bed plug while driving.
4. Using the separate shut offs for the converter and inverter makes it easy to switch from boon docking mode to shore power mode to storage mode.
5. It works - being trained by Youtube and message boards is a little scary when working with electricity. So there is always the apprehension when flipping the first switch at project's end.
So those are my thoughts and experiences before, during, and after. Hope it helps...Last edited by Boom 'r Bust; 03-19-2020 at 07:06 AM.
-
03-22-2020, 12:07 PM #8
Boom, check out some of my posts.
I have the same trailer and a few hundred posts on solar.
Do a search for:
First 220RK Solar / Lithium install
Sent from my iPhone using TapatalkResistance is Not Futile, It's Voltage Divided by Current.
-
03-22-2020, 12:28 PM #9
- Join Date
- May 2019
- Posts
- 257
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Hey DMB! Thanks for checking in... Your solar and electrical install is epic. Especially for a small 5er like the 220RK. My goals and budget are a little different than yours though. We do not plan on going full time, but I wanted to be able to comfortably boondock for 3 to 5 days. I budgeted 4K to do this. I know you have mentioned your system was around 10K. Plus with my simple design and components I know I can easily transfer everything over to another rig if I decide to upgrade.
Take care and be safe in this crazy time. Hope your finding plenty of boondocking spots to self quarantine at...
-
04-01-2020, 02:39 PM #10
- Join Date
- Apr 2019
- Posts
- 111
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Stupid question, do I need to...
Today, 01:39 PM in New To RV'ing, Purchase Questions & General Concerns