f250 factory puck system 5th wheel hitch

[Joeyivi]

Greetings all,
My wife and I just put a deposit down on a 290BH. It is currently being built and we should be able to take delivery in November. Being that we are coming from and imagine travel trailer I dont have much 5th wheel experience. My current tow vehicle is a 2013 Ford F250 diesel. I have a drop in bed liner installed from Ford that I would love not to have to hack up. For those that have the factory puck system are you able to use a standard bed liner? My truck is not prepped with the system but it looks like I can buy the brackets from Ford. Any insight would be greatly appreciated.
Joe

[huntr70]

If you use the factory puck system, the bedliner will have to have 4 holes cut into it.

You can accomplish the same thing by using the Pullrite underbed mount kits. Probably cheaper than the factory set up also.

[BabyBober]

The ford Factory system is made by Reese and can be bought under reese part numbers at less cost then ford parts. as Steve stated, you will need to cut 4 holes in your bedliner

JIm

[Joeyivi]

That’s great news thanks everyone