User Tag List
Results 21 to 30 of 36
Thread: 2020 2500RL MORryde 3000 Install
-
12-09-2020, 02:40 PM #21
-
01-21-2021, 02:21 PM #22
- Join Date
- Jun 2019
- Location
- Franklin,MI
- Posts
- 381
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
RMCrowe thanks for answering the height question. My 2500RL is in winter storage right now, can you tell me the CRE model number you ordered? It would save me a trip.
2018 F-250 6.7L Leveled, 35’s.
2019 Imagine 2500RL, 640w Solar, Lion UT1300s, 3000w Inverter
CRE3000, Sumosprings
-
01-21-2021, 09:21 PM #23
- Join Date
- Oct 2018
- Location
- Eastern Washington
- Posts
- 122
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
01-24-2021, 12:31 AM #24
- Join Date
- Nov 2019
- Posts
- 152
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I used the cre2-35 : https://www.amazon.com/dp/B007HRWIO0...ing=UTF8&psc=1
And also the wet bolts:
https://www.amazon.com/dp/B007HRICH2...ing=UTF8&psc=1
Worked fine. But I lifted the whole trailer to do this and the shackles flipped which was a bit of a pain to correct, if I was doing it again. I think id do one side at a time.
-
01-24-2021, 12:00 PM #25
- Join Date
- Oct 2018
- Location
- Eastern Washington
- Posts
- 122
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I did the wet bolts too, they're great. I did one side at a time. Shackle (inside) end first. When they didn't cooperate I used a jack to get the outside end of the leaf spring to the right height and a c-clamp with wooden blocks to move it fore/aft so the bolt hole lined up. With an impact wrench to do the job I think lifting and lowering the trailer and getting jack stands and blocks in place took half my time.
-
01-25-2021, 09:48 AM #26
- Join Date
- Jun 2019
- Location
- Franklin,MI
- Posts
- 381
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the updates and part numbers guys.
2018 F-250 6.7L Leveled, 35’s.
2019 Imagine 2500RL, 640w Solar, Lion UT1300s, 3000w Inverter
CRE3000, Sumosprings
-
01-27-2021, 05:24 PM #27
- Join Date
- Nov 2020
- Location
- Woodland, WA
- Posts
- 185
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Has anyone replaced the Dexter 3500# axles with the 5200# Timbren axle-less spindle system? No need for the CRE, Moryde, Lippert, or RoadArmor, plus increase the ground clearance.
Mark and Judy
2021 F350 Lariat Crew 4x4 SRW 7.3 Godzilla
2021 Imagine 2500RL w/Hensley Arrow hitch
Fleet Manager, Cowlitz County WA Search & Rescue
-
02-05-2021, 11:30 AM #28
- Join Date
- Feb 2021
- Location
- Massachusetts
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Just bought a 2021 Imagine 2970rl and went with the CRE 4000 and all three xbrace stabilizers and the short wet bolt shackle . Got about a 2 inch lift out of all the install. Had the dealer in Ohio do it and it is still sitting there for the winter. It will be about an 800 mile journey to bring home in a few months and will let you know how it tows this first time Not sure how bad the first step may be off the ground now but will let you all know.
S Mark and Denise
2021 Chev 2500 LTZ gasser
2021 GD Imagine 2970RL
-
03-05-2021, 10:59 AM #29
thanks for this post, my problem has been fixed too
-
04-01-2021, 08:08 AM #30
Extending 381m garage?
Today, 10:06 PM in General Discussion