User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: Need to re-level ?
-
05-17-2020, 08:39 PM #1
- Join Date
- May 2020
- Posts
- 19
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Need to re-level ?
Dealer delivered my new Solitutde over the week end and leveled it for us.Today I discovered the left front wheel is slightly (1/4 inch) off the crushed stone we put down in advance of it arriving. Should I re- level or can I slightly raise one stabilizer?
-
05-17-2020, 08:58 PM #2
- Join Date
- Oct 2017
- Location
- Dripping Springs , Texas
- Posts
- 611
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
I think both front are on one hydraulic circuit. The rear are paired up side to side.
CharlieVickie & Charlie
2019 310GK-R
2020 RAM Longhorn DRW Cummins /Aisin
-
05-18-2020, 08:15 AM #3
- Join Date
- Aug 2017
- Location
- Florida Space Coast
- Posts
- 3,879
- Blog Entries
- 1
- Mentioned
- 94 Post(s)
- Tagged
- 0 Thread(s)
On my 310GK-R I can raise or lower each side independently. Sometimes if I level and find one side too high for whatever reason I lower it. I don't need to be perfectly level and sometimes choose one side higher than the other for rain gutter draining (I prefer it on the PS).
If you put crushed stone down maybe you can relieve the stone?
If I had to level for any amount of time (probably greater than a few days) and could only get it level with a wheel off the ground I'd probably put a board or pad under the wheel(s). I wouldn't want a tire hanging on the suspension for too long.Larry KE4DMG
2022 F-350 KRU SRW LB - Airlift 5000+, ForScan, 37 RDS Aux Tank,
2019 310GK-R - Sailuns; MorRyde IS; Disc Brakes; 20K Reese Goosebox
Search kalakamods for my mods
-
05-18-2020, 08:23 AM #4
- Join Date
- May 2020
- Posts
- 19
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I will check next weekend to see if my levelers are independent also , if not I will slightly jack that wheel and use a piece of 2x8 under it. Don't need much.
TCL TV turns on by itself after...
Today, 08:03 PM in Electronics