User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Site Sponsor FirstAscent's Avatar
    Join Date
    Feb 2020
    Posts
    196
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)

    recommended upgrades BEFORE first use?

    Happy Memorial Day weekend everyone!

    I have a 381 I've been waiting on forever but is finally supposed to be done done (full body paint and morRyde ISS and disc brake upgrade) most likely end of July and I will be full-timing in it.

    As I'm starting to purchase the small items that are necessities such as sewer hose, wheel chocks, etc, I'm curious as to any upgrades/mods/prep etc that I should take care of ahead of time while it's new and unused.

    For example, if there were something I should do with any drain or sewer hoses, I'd want to do that first before it's "used" haha. Not that it's required, but would just make it easier hehe.

    Maybe there isn't anything, but maybe there are? I don't know, so I'm reaching out to all of you who have way more experience than I do.

    Thanks for all your help!

  2. #2
    Rolling Along cookinwitdiesel's Avatar
    Join Date
    May 2019
    Location
    Wyoming
    Posts
    650
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)
    I typed this all out for a new Solitude owner the other day, should mostly apply to other model trailers as well. The solar/battery stuff is optional but not something anyone would regret. He has the residential fridge as well, hence the mention of that inverter.

    "So, here is some of what I would recommend:

    Solar, 600-800w minimum of panels. You should already have the wires ran from the roof to your basement I believe since you have a new model year unit. You will need an MPPT Charge Controller to convert the solar PV power to the right voltage for your batteries. Victron Energy is my recommendation here. The SmartSolar MPPT 150\60-MC4 should be a good fit. I believe your solar wires from the roof already have MC4 connectors at both ends so the -MC4 variant saves you a step. You want the SmartSolar for the bluetooth capability, this will be so that the MPPT can communicate with the Battery Monitor below. https://battlebornbatteries.com/shop...r-mppt-150-60/

    Batteries. The ones your dealer provides are likely garbage. I would recommend replacing with a few Lithium Batteries. BattleBorns are the most well known and widely available. I would recommend 2 minimum to at least 4x of their 100 Ah batteries. These will be connected in parallel. These will perform well beyond flooded lead acid, be lighter weight, and last far longer. They cost more up front but they are worth it in my opinion. https://battlebornbatteries.com/shop...cycle-battery/

    Battery Monitor - this will allow you to keep tabs on how your batteries are doing (state of charge) as well as monitor the charge/discharge rate. I recommend Victron Energy as they are a fantastic brand and company with quality products. Look into a BMV-712 or SmartShunt from them. https://battlebornbatteries.com/shop...uetooth-built/

    Inverter, your residential fridge comes with a 1000w inverter. Inverters convert DC electricity from your batteries to AC electricity which is what appliances and anything you plug into an outlet use. It will be wired from the factory to power ONLY the refrigerator. This leaves some headroom on the table that can be tapped with a little bit of rewiring. I did this and was very pleased with the outcome. I will share a diagram of what I did after this message.

    Converter - this is the battery charger. It converts AC electricity into DC electricity to charge your batteries and power your 12v DC systems (when you are plugged into shore power). The factory converter from WFCO is mediocre at best. I recommend a replacement from Progressive Dynamics. They make high quality units that are intended specifically for charging lithium batteries. https://battlebornbatteries.com/shop...ttery-charger/

    I absolutely recommend an EMS. This is a surge protector that will also protect your RV by disconnecting it when there is bad power at the post in a campground. bad power includes conditions like low or high voltage, bad frequency, miswired plugs, etc. Southwire and Progressive Industries are both well regarded brands. You can get a hardwired unit that installs inside your trailer, or an external unit that plugs in to the post and your shore power plugs into it. Allegedly these things get stolen on occasion at campsites but I have never experienced this so far. The hardwired options prevents this from being an issue. I currently have a Progressive Industries 50-amp external unit but if doing it over again with go with this: https://www.amazon.com/Surge-Guard-3...dp/B01AASJHGO/

    That should wrap up the power stuff!

    You mentioned you will have the Onan Generator. This will burn through propane handily when you use it. The RV will come with 2x 30# tanks, I recommend getting 2x 40# tanks to boost your capacity. They are drop in upgrades where your 30# tanks will be. I did this and still take my 30s with me as well for additional capacity. I just keep them in my truck bed strapped down with a Camco cover over them to keep them out of the elements. You can get the tanks and get them filled at somewhere like a Tractor Supply Co. Here is the cover I use: https://www.amazon.com/Camco-40559-H...dp/B00GOW6VAQ/

    Your trailer is a newer model so it should have the Morryde CRE3000 suspension upgrade which is nice, I have an older 2019 so did not get this and upgraded it myself, you are good to go there.

    You will have Westlake G-Rated tires. Online people gripe about "china bombs" but the G-rated tires are built like tanks and should take care of you if you take care of them. Keep them at 110 PSI, check the pressure regularly, and get your trailer weighed at a CAT Scales to know what your weights are. As long as they are full and not overloaded, these tires should last a long time. I do recommend getting a TPMS installed however, just in case something does go south, this will allow you to identify it before things get critical and do damage (to you or your trailer). There are many popular brands here, just get one you like.

    Depending on your preference, you may want to get a washer/dryer for the trailer. The splendide units are a go to that many (including myself) are happy with. They install in the front bedroom closet on the left and right. One caveat here, you already will have the Onan, and a SRW 1-ton truck. Adding these WILL make for a very heavy pin weight that may push your truck beyond its rated limits.

    A morryde (or other brand) cord reel is a good idea. There are floor mount and ceiling mount options. It is just nice to have somewhere to store your shore power out of the way.

    You should get a water pressure regulator. Some campgrounds have very high pressure water and this can blow fixtures/fittings causing leaks and flooding. I have been happy with this popular option: https://www.amazon.com/Renator-M11-0...dp/B01N7JZTYX/

    For sewer, I would get 2 of these (one for each dump outlet). I leave them attached all the time. This prevents any unpleasant experiences. They have traveled many thousands of miles and not moved a hair from when I installed them. https://www.amazon.com/Valterra-T58-...dp/B000BGHYJS/

    You can use one sewer hose and go between the 2 dumps or get 2 separate hoses and run them to a Y before going into the ground. I installed a 2nd hose holder and keep 4 lengths of hose (2 per) at the front and back near the outlets. Having a clear adapter like this is a good idea so you can see the flow of waste easily: https://www.amazon.com/gp/product/B000NCS7GE/

    Here is the 2nd sewer hose holder I got, I installed this right behind the forward dump station (the factory one is already by the rear position): https://www.amazon.com/gp/product/B01NA0K9YR/

    I got 2 of these, they help maintain drop for sewer and keep your hoses off the ground. https://www.amazon.com/Soporte-Camco...dp/B000BUU5WW/

    This is a shower head replacement that works well - nice upgrade over stock. https://www.amazon.com/Oxygenics-Sta...dp/B01EVTJHYK/

    I recommend putting this valve before the shower head so you can actually stop the flow of water vs the trickle allowed by the RV shower heads. https://www.amazon.com/gp/product/B00JQDKTUS/

    These are much nicer sink faucets than what comes from the factory (plastic trash). We replaced in both bathrooms and love it. These are a very easy to install drop-in upgrade. https://www.lowes.com/pd/Delta-Winde...ain/1000044925

    You will probably want to have your dealer install wirelessly controlled fans in the bathrooms. The OEM fans are a joke and in the half bath in the back you have to be Shaq to reach the little knob to actually open the vent. Our dealer installed Dometic FantasticFans and we like them, a Maxxair would be fine too.

    Idk if you have a vacuum figured out already, but you will want one. We have a Dyson V7 stick vacuum we got at Costco and absolutely love it. So much so I bought a 2nd one for our house.

    The included mattress is not the best but the bed size is weird (if you get the king). Since it is an RV King it is 72" wide (not the usual 76") which makes sourcing a mattress and sheets a little harder. I ended up just buying a foam topper and cutting off 4" all the way down one side. This helped make things considerably more comfortable. We ended up with a set of california king sheets (right width, extra long but we tuck away the excess).

    BAL X-Chocks are a nice option to help stabilize the rig after you are setup. These are for stability only, not safety. You will want the wedge chocks to immobilize the trailer as well.

    That is a pretty comprehensive "getting started" list haha. I am sure there are some small things I am forgetting but this should more than get you going."
    2019 GMC Sierra 3500HD Denali Diesel DRW (Crew Cab | 8 Ft bed | OEM Puck System | Curt Gooseneck Ball for OEM Puck | Timbrens on rear axle)
    2019 Grand Design Solitude S-Class 3740BH-R Fifth Wheel (Onan 5500W LP Generator | MORryde CRE3000 and HD Shackles/Wet Bolts | 3x MORryde Cross Members | 8k Axles and Disc Brakes | Sailun S637 ST | Reese GooseBox 20k 2nd Gen | Splendide Stackable Washer and Dryer)
    Full Suite of Victron Energy Products (2x 5k 24v Quattro Inverter/Charger | 2x 25.6/200 LFP Smart LiFePO4 Batteries | 2880w of Solar Panels across 4x MPPTs | Cerbo GX)

  3. #3
    Rolling Along
    Join Date
    Jun 2019
    Location
    Maryland
    Posts
    646
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    First absolute must have:

    Coffee maker stuck to the counter with Velcro. The rest of the must haves will come with time and your own needs. One thing I know for certain is you'll need lots of coffee. 😁

  4. #4
    Setting Up Camp nswinton's Avatar
    Join Date
    Jul 2019
    Location
    Massachusetts
    Posts
    26
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    We have a Reflection 295RL that we used for four months over the past year. There are a world of things you can do but we were very happy without adding much. I think the #1 thing that Grand Design owners do is either replace the mattress or get a mattress topper. We got the 3" Sealy memory foam mattress topper. Long story short, try out the bed and see if it works for you.
    We also got a portable EMS - https://www.progressiveindustries.net/ems-pt50x - that I plug into the campground power outlet to make sure the power is good before I connect the RV. It also handled surges.
    One last thing, and you could wait on this, is a Valterra gate valve for the waste pipe. Grand Designs tend to let a cup or two of waste water accumulate and it pours out what you open the sewer cap. It's a cheap and easy addition. This is what we got: https://www.amazon.com/Valterra-T58-...0366730&sr=8-3.

    Have a blast!

    2020 Reflection 295RL - F-250 6.7L Powerstroke
    - Neil

    2020 Reflection 295RL
    2019 Ford F250 XLT 6.7L Powerstroke Diesel

  5. #5
    Big Traveler Wicked ace's Avatar
    Join Date
    Sep 2018
    Location
    Southeast PA.
    Posts
    1,411
    Mentioned
    20 Post(s)
    Tagged
    0 Thread(s)
    A couple more things are an inline water filter, a water pressure regulator and a brass 90 deg fitting to attach at the city water connection in your Nautilus panel.
    2018 F150 XLT 301a, Screw, 4x4, HDPP, Max tow, Andersen Ultimate w/ Curt Double Lock hitch.
    2019 Grand Design Reflection 150 series 260RD.... SOLD!!!!.

  6. #6
    Site Sponsor FirstAscent's Avatar
    Join Date
    Feb 2020
    Posts
    196
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by cookinwitdiesel View Post
    I typed this all out for a new Solitude owner the other day, should mostly apply to other model trailers as well. The solar/battery stuff is optional but not something anyone would regret. He has the residential fridge as well, hence the mention of that inverter.

    "So, here is some of what I would recommend:

    Solar, 600-800w minimum of panels. You should already have the wires ran from the roof to your basement I believe since you have a new model year unit. You will need an MPPT Charge Controller to convert the solar PV power to the right voltage for your batteries. Victron Energy is my recommendation here. The SmartSolar MPPT 150\60-MC4 should be a good fit. I believe your solar wires from the roof already have MC4 connectors at both ends so the -MC4 variant saves you a step. You want the SmartSolar for the bluetooth capability, this will be so that the MPPT can communicate with the Battery Monitor below. https://battlebornbatteries.com/shop...r-mppt-150-60/

    Batteries. The ones your dealer provides are likely garbage. I would recommend replacing with a few Lithium Batteries. BattleBorns are the most well known and widely available. I would recommend 2 minimum to at least 4x of their 100 Ah batteries. These will be connected in parallel. These will perform well beyond flooded lead acid, be lighter weight, and last far longer. They cost more up front but they are worth it in my opinion. https://battlebornbatteries.com/shop...cycle-battery/

    Battery Monitor - this will allow you to keep tabs on how your batteries are doing (state of charge) as well as monitor the charge/discharge rate. I recommend Victron Energy as they are a fantastic brand and company with quality products. Look into a BMV-712 or SmartShunt from them. https://battlebornbatteries.com/shop...uetooth-built/

    Inverter, your residential fridge comes with a 1000w inverter. Inverters convert DC electricity from your batteries to AC electricity which is what appliances and anything you plug into an outlet use. It will be wired from the factory to power ONLY the refrigerator. This leaves some headroom on the table that can be tapped with a little bit of rewiring. I did this and was very pleased with the outcome. I will share a diagram of what I did after this message.

    Converter - this is the battery charger. It converts AC electricity into DC electricity to charge your batteries and power your 12v DC systems (when you are plugged into shore power). The factory converter from WFCO is mediocre at best. I recommend a replacement from Progressive Dynamics. They make high quality units that are intended specifically for charging lithium batteries. https://battlebornbatteries.com/shop...ttery-charger/

    I absolutely recommend an EMS. This is a surge protector that will also protect your RV by disconnecting it when there is bad power at the post in a campground. bad power includes conditions like low or high voltage, bad frequency, miswired plugs, etc. Southwire and Progressive Industries are both well regarded brands. You can get a hardwired unit that installs inside your trailer, or an external unit that plugs in to the post and your shore power plugs into it. Allegedly these things get stolen on occasion at campsites but I have never experienced this so far. The hardwired options prevents this from being an issue. I currently have a Progressive Industries 50-amp external unit but if doing it over again with go with this: https://www.amazon.com/Surge-Guard-3...dp/B01AASJHGO/

    That should wrap up the power stuff!

    You mentioned you will have the Onan Generator. This will burn through propane handily when you use it. The RV will come with 2x 30# tanks, I recommend getting 2x 40# tanks to boost your capacity. They are drop in upgrades where your 30# tanks will be. I did this and still take my 30s with me as well for additional capacity. I just keep them in my truck bed strapped down with a Camco cover over them to keep them out of the elements. You can get the tanks and get them filled at somewhere like a Tractor Supply Co. Here is the cover I use: https://www.amazon.com/Camco-40559-H...dp/B00GOW6VAQ/

    Your trailer is a newer model so it should have the Morryde CRE3000 suspension upgrade which is nice, I have an older 2019 so did not get this and upgraded it myself, you are good to go there.

    You will have Westlake G-Rated tires. Online people gripe about "china bombs" but the G-rated tires are built like tanks and should take care of you if you take care of them. Keep them at 110 PSI, check the pressure regularly, and get your trailer weighed at a CAT Scales to know what your weights are. As long as they are full and not overloaded, these tires should last a long time. I do recommend getting a TPMS installed however, just in case something does go south, this will allow you to identify it before things get critical and do damage (to you or your trailer). There are many popular brands here, just get one you like.

    Depending on your preference, you may want to get a washer/dryer for the trailer. The splendide units are a go to that many (including myself) are happy with. They install in the front bedroom closet on the left and right. One caveat here, you already will have the Onan, and a SRW 1-ton truck. Adding these WILL make for a very heavy pin weight that may push your truck beyond its rated limits.

    A morryde (or other brand) cord reel is a good idea. There are floor mount and ceiling mount options. It is just nice to have somewhere to store your shore power out of the way.

    You should get a water pressure regulator. Some campgrounds have very high pressure water and this can blow fixtures/fittings causing leaks and flooding. I have been happy with this popular option: https://www.amazon.com/Renator-M11-0...dp/B01N7JZTYX/

    For sewer, I would get 2 of these (one for each dump outlet). I leave them attached all the time. This prevents any unpleasant experiences. They have traveled many thousands of miles and not moved a hair from when I installed them. https://www.amazon.com/Valterra-T58-...dp/B000BGHYJS/

    You can use one sewer hose and go between the 2 dumps or get 2 separate hoses and run them to a Y before going into the ground. I installed a 2nd hose holder and keep 4 lengths of hose (2 per) at the front and back near the outlets. Having a clear adapter like this is a good idea so you can see the flow of waste easily: https://www.amazon.com/gp/product/B000NCS7GE/

    Here is the 2nd sewer hose holder I got, I installed this right behind the forward dump station (the factory one is already by the rear position): https://www.amazon.com/gp/product/B01NA0K9YR/

    I got 2 of these, they help maintain drop for sewer and keep your hoses off the ground. https://www.amazon.com/Soporte-Camco...dp/B000BUU5WW/

    This is a shower head replacement that works well - nice upgrade over stock. https://www.amazon.com/Oxygenics-Sta...dp/B01EVTJHYK/

    I recommend putting this valve before the shower head so you can actually stop the flow of water vs the trickle allowed by the RV shower heads. https://www.amazon.com/gp/product/B00JQDKTUS/

    These are much nicer sink faucets than what comes from the factory (plastic trash). We replaced in both bathrooms and love it. These are a very easy to install drop-in upgrade. https://www.lowes.com/pd/Delta-Winde...ain/1000044925

    You will probably want to have your dealer install wirelessly controlled fans in the bathrooms. The OEM fans are a joke and in the half bath in the back you have to be Shaq to reach the little knob to actually open the vent. Our dealer installed Dometic FantasticFans and we like them, a Maxxair would be fine too.

    Idk if you have a vacuum figured out already, but you will want one. We have a Dyson V7 stick vacuum we got at Costco and absolutely love it. So much so I bought a 2nd one for our house.

    The included mattress is not the best but the bed size is weird (if you get the king). Since it is an RV King it is 72" wide (not the usual 76") which makes sourcing a mattress and sheets a little harder. I ended up just buying a foam topper and cutting off 4" all the way down one side. This helped make things considerably more comfortable. We ended up with a set of california king sheets (right width, extra long but we tuck away the excess).

    BAL X-Chocks are a nice option to help stabilize the rig after you are setup. These are for stability only, not safety. You will want the wedge chocks to immobilize the trailer as well.

    That is a pretty comprehensive "getting started" list haha. I am sure there are some small things I am forgetting but this should more than get you going."
    Wow, thanks for all the info! I have thought about some of that but not all.

    1. Solar - This is one area I've put a lot of thought into and already starting on. I'm building my own 24v battery bank with 14.5kwh worth of LiFePO4 batteries. The end goal is to use 90% of Victron components and yes their MPPT's. Their Quattro meets the specs I need but I really want their Multiplus-II which they haven't released for the U.S. markets yet (only 220v). So we'll see. The panels I'm looking at now will put me at 1400w of solar. and I do understand I'll need a 24v-to-12v dc-dc converter, I'm OK with this.

    p.s. Just read your sig and see you have a pretty sweet solar setup and running 24v as well! Well done. How many individual solar panels do you have? Basically your whole roof it looks like?

    2. EMS - I definitely hadn't considered this yet but makes obvious sense! I think I will for sure go for hardwired, because why not. Simpler and always ready.

    3. Propane tanks - Never considered larger tanks, but great suggestion. Obviously the goal is to never need it but nice to have it when you do need it. For myself I think I'll stick with the two 30's until I've got some mileage on the solar setup.

    4. Tires - I do have TPMS sensors ready for the tires, I'm fairly certain I'll swap the factory tires out for the Goodyear Endurance tires though right away when I get the TPMS's installed.

    5. Washer/Dryer combo - Definitely something I've started looking into.

    6. Cord Reel - Again something else I didn't consider! What about the actual cord, are they typically included?

    7. Water Pressure Regulator - Something else I didn't think of but useful!

    8. Sewer Valve - This looks like a handy item to have installed!

    9. Shower Head and valve - Definitely something I figured I'd replace fairly quickly, didn't think about the valve though.

    10. Faucets - Also something I'll for sure be replacing once the unit arrives and I get a feel for the interior.

    11. Wireless fans - This sounds great, and I can imagine the annoyance reaching up to open/close.

    12. Vacuum - I love those stick vacuums! I have a similar Dyson but without the stick extension I use for cleaning my vehicles, they're great!

    13. Mattress - I'm 100% getting a new mattress ASAP! I did opt for the King upgrade and have heard a couple different sizes, so need to confirm the size for my unit just to be sure.



    Quote Originally Posted by Roll With The Changes View Post
    First absolute must have:

    Coffee maker stuck to the counter with Velcro. The rest of the must haves will come with time and your own needs. One thing I know for certain is you'll need lots of coffee. ��
    Haha, you bring up a great point! Honestly right now I have my spot I go to every single morning, this will be a tough transition lol. So will need to make sure I'm prepared hehe.

    Quote Originally Posted by nswinton View Post
    We have a Reflection 295RL that we used for four months over the past year. There are a world of things you can do but we were very happy without adding much. I think the #1 thing that Grand Design owners do is either replace the mattress or get a mattress topper. We got the 3" Sealy memory foam mattress topper. Long story short, try out the bed and see if it works for you.
    We also got a portable EMS - https://www.progressiveindustries.net/ems-pt50x - that I plug into the campground power outlet to make sure the power is good before I connect the RV. It also handled surges.
    One last thing, and you could wait on this, is a Valterra gate valve for the waste pipe. Grand Designs tend to let a cup or two of waste water accumulate and it pours out what you open the sewer cap. It's a cheap and easy addition. This is what we got: https://www.amazon.com/Valterra-T58-...0366730&sr=8-3.

    Have a blast!

    2020 Reflection 295RL - F-250 6.7L Powerstroke
    Thanks! Yes I'm definitely planning on doing a full mattress replacement.
    I do like that Valterra gate valve, thanks!

  7. #7
    Rolling Along cookinwitdiesel's Avatar
    Join Date
    May 2019
    Location
    Wyoming
    Posts
    650
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by FirstAscent View Post
    snipped
    I have 14x panels, 6x 200w and 8x 210w. The 6 are split into 3 series connected pairs each to a smaller MPPT due to lack of bypass diodes. The following 8x are all in series on the 250/70. As noted, my roof is highly utilized haha. I realized while installing the last 8 panels yesterday I MAY have been able to squeeze in one more but it would have been badly shaded by the bathroom vent fan cover to the point it would never be active. Attached is my system diagram you can reference. The Quattro should be fine for inverter needs. The MP II has some enhancements to benefit grid-tied systems (more compliance with various electrical codes) which are more common elsewhere but of no need/use for us. Feel free to ask me any questions as they come up! Middle picture is my 24-12v conversion hardware and the last picture is the installed system (mostly) in my passthrough.

    I may expand the system in the future adding a 2nd Quattro and Autotransformers to step up the generator to 120/240v output as well as load balance the inverter outputs - that diagram is at the bottom.

    Click image for larger version. 

Name:	RV Inverter Design - Single Quattro Installed.jpg 
Views:	66 
Size:	89.8 KB 
ID:	26728

    Click image for larger version. 

Name:	IMG_20200307_173051.jpg 
Views:	45 
Size:	96.8 KB 
ID:	26729

    Click image for larger version. 

Name:	IMG_20200517_184728.jpg 
Views:	51 
Size:	94.8 KB 
ID:	26730

    Click image for larger version. 

Name:	RV Inverter Design - Small MPPTs END STATE 2880w Autotransformer - favor off-grid.jpg 
Views:	53 
Size:	94.1 KB 
ID:	26731
    Last edited by cookinwitdiesel; 05-24-2020 at 07:42 PM.
    2019 GMC Sierra 3500HD Denali Diesel DRW (Crew Cab | 8 Ft bed | OEM Puck System | Curt Gooseneck Ball for OEM Puck | Timbrens on rear axle)
    2019 Grand Design Solitude S-Class 3740BH-R Fifth Wheel (Onan 5500W LP Generator | MORryde CRE3000 and HD Shackles/Wet Bolts | 3x MORryde Cross Members | 8k Axles and Disc Brakes | Sailun S637 ST | Reese GooseBox 20k 2nd Gen | Splendide Stackable Washer and Dryer)
    Full Suite of Victron Energy Products (2x 5k 24v Quattro Inverter/Charger | 2x 25.6/200 LFP Smart LiFePO4 Batteries | 2880w of Solar Panels across 4x MPPTs | Cerbo GX)

  8. #8
    Fireside Member Kensoko's Avatar
    Join Date
    May 2020
    Location
    North Dakota
    Posts
    42
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    If I may add this. It’s priceless when you get you black tank clogged. It happed to us last year and I was able to backflush the tank and clear the clog. It took about 10 times for it to clear. Close the valve full up the dump pipe and then open the valve. Also works great to get a full clean at the end of the year.

    https://www.amazon.com/dp/B00T36LJF2..._Im-YEbCMQ34FH

  9. #9
    Site Sponsor FirstAscent's Avatar
    Join Date
    Feb 2020
    Posts
    196
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by cookinwitdiesel View Post
    I have 14x panels, 6x 200w and 8x 210w. The 6 are split into 3 series connected pairs each to a smaller MPPT due to lack of bypass diodes. The following 8x are all in series on the 250/70. As noted, my roof is highly utilized haha. I realized while installing the last 8 panels yesterday I MAY have been able to squeeze in one more but it would have been badly shaded by the bathroom vent fan cover to the point it would never be active. Attached is my system diagram you can reference. The Quattro should be fine for inverter needs. The MP II has some enhancements to benefit grid-tied systems (more compliance with various electrical codes) which are more common elsewhere but of no need/use for us. Feel free to ask me any questions as they come up! Middle picture is my 24-12v conversion hardware and the last picture is the installed system (mostly) in my passthrough.

    I may expand the system in the future adding a 2nd Quattro and Autotransformers to step up the generator to 120/240v output as well as load balance the inverter outputs - that diagram is at the bottom.

    Click image for larger version. 

Name:	RV Inverter Design - Single Quattro Installed.jpg 
Views:	66 
Size:	89.8 KB 
ID:	26728

    Click image for larger version. 

Name:	IMG_20200307_173051.jpg 
Views:	45 
Size:	96.8 KB 
ID:	26729

    Click image for larger version. 

Name:	IMG_20200517_184728.jpg 
Views:	51 
Size:	94.8 KB 
ID:	26730

    Click image for larger version. 

Name:	RV Inverter Design - Small MPPTs END STATE 2880w Autotransformer - favor off-grid.jpg 
Views:	53 
Size:	94.1 KB 
ID:	26731
    Well done! It looks great.

    How do you like the linx components? I hadn’t looked into them yet but it sure creates a clean distribution.
    2021 Momentum 381M (Ordered 3/6/2020, Delivered 8/27/2020)
    -- Full Body Paint, MORryde IS 7k w/ disc brakes, Gen-Y Gooseneck conversion, 3 AC, Heat Pump, Dual Pane Windows, Slide Toppers, Residential Fridge

  10. #10
    Rolling Along cookinwitdiesel's Avatar
    Join Date
    May 2019
    Location
    Wyoming
    Posts
    650
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by FirstAscent View Post
    Well done! It looks great.

    How do you like the linx components? I hadn’t looked into them yet but it sure creates a clean distribution.
    I love them. If you price out a pair of 1000A busbars and fuse holders against a Lynx Distributor, they are not a bad value at all! As noted they are also very clean and integrate perfectly with the Lynx Shunt (which is a little high compared to other BMVs but is ROCK SOLID) and does include the ANL fuse holder. As a life long LEGO fan, I greatly appreciated the modularity too
    2019 GMC Sierra 3500HD Denali Diesel DRW (Crew Cab | 8 Ft bed | OEM Puck System | Curt Gooseneck Ball for OEM Puck | Timbrens on rear axle)
    2019 Grand Design Solitude S-Class 3740BH-R Fifth Wheel (Onan 5500W LP Generator | MORryde CRE3000 and HD Shackles/Wet Bolts | 3x MORryde Cross Members | 8k Axles and Disc Brakes | Sailun S637 ST | Reese GooseBox 20k 2nd Gen | Splendide Stackable Washer and Dryer)
    Full Suite of Victron Energy Products (2x 5k 24v Quattro Inverter/Charger | 2x 25.6/200 LFP Smart LiFePO4 Batteries | 2880w of Solar Panels across 4x MPPTs | Cerbo GX)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.