LED light glare reduction help

[RickLight]

I'm a fan of these wall switch replacements. They work like a switch but dim as needed.

https://www.amazon.com/JR-Products-0...dp/B074JFK9DB/

[Sirpowel]

Jer
I've NEVER BLOGGED I'd really like to speak with you regarding this modification. I have a GD29RLS.
My personal email is [email protected]

[herewego]

changed inside and awning light switches to HS dimmers from https://pdxrvwholesale.com/, zero flicker

[Ynot4me2]

So for the ceiling lights, are you replacing the switch that is in the control panel with that dimmer switch? It will fit?

[Jerryr]

So for the ceiling lights, are you replacing the switch that is in the control panel with that dimmer switch? It will fit?

YES, exactly. Look at my earlier posting. You do need an additional $5 plastic adapter that snaps into the hole fir the removed toggle switch and mount the new dimmer on that plate. That plate is available from a guy that makes them with a 3D printer.


https://youtu.be/pPX_S9wx4l8

[herewego]

For my modification, I installed the dimmer switch in the wall for main lights and awning. I did not like opening a door every time to turn the lights on or off. The 303 has two awning lights, split those so larger awning can be on & dimmed or both awnings can be on and dimmed. I choose to do the dimming of both awning lights with same switch, did not see a need to have one set bright and the other set dim but you could do that with a second switch.

[Fsalmy]

YES, exactly. Look at my earlier posting. You do need an additional $5 plastic adapter that snaps into the hole fir the removed toggle switch and mount the new dimmer on that plate. That plate is available from a guy that makes them with a 3D printer.

You can buy the dimmer switches directly from the manufacturer (made in USA, too): https://www.pca.com/pcarv/

[Sirpowel]

I am a member and have tried getting hold of JerR regarding the adapter plate. If anyone has the address of the gentleman with those plates please let me know at [email protected].

[Jerryr]

I am a member and have tried getting hold of JerR regarding the adapter plate. If anyone has the address of the gentleman with those plates please let me know at [email protected].

I just replied to your PM with Martin Robinson’s PayPal contact email

[Jerryr]

I am a member and have tried getting hold of JerR regarding the adapter plate. If anyone has the address of the gentleman with those plates please let me know at [email protected].

Oops. The PM was for another nembers request I must sent you an email.