2020 2400BH Solar Inlet

[Jellyroll Jones]

Hi all,

I have a new 2020 2400BH and I cannot seem to locate the Solar Power inlet? Did they move it or is it now only set up for roof solar? Any help would be awesome.

Pete

[pjmjunior]

On the 2019 it's on the driver side close to the front, about chest high.

[huntr70]

They've all gone to roof solar prep.

[Jellyroll Jones]

Thank You. Do you know if you can set it up for portable or does it have to be roof mounted?

[huntr70]

I think there are just wire terminations up there. You could add on to them and put whatever you want on.

[azink007]

My 2020 2400BH has the Furrion connector on the drivers side in the front with 12 AWG wire going to the ring terminals going to the battery lugs on the underside. No inline fuse, and no rooftop solar prep. I'm likely going to take apart my Renogy suitcase and turn it into a rooftop but run my own cables (search for 2400BH solar for a great writeup).

[tonygoncalves]

My 2020 2400BH has the Furrion connector on the drivers side in the front with 12 AWG wire going to the ring terminals going to the battery lugs on the underside. No inline fuse, and no rooftop solar prep. I'm likely going to take apart my Renogy suitcase and turn it into a rooftop but run my own cables (search for 2400BH solar for a great writeup).

Same here. My 2020 2400BH also has the Furrion on the drivers side. I spliced in an old PWM solar charger I had from my previous trailer, and now have it set up for my 2x 40W portable panels that were also from my previous trailer. Haven't needed to use them yet, the 340W of panels I have on the roof are enough for now. But they might come in handy on the spring and fall days where I'm parked in the shade and need all the power I can get.