New dometic refrigerator not working on gas

**Jquillen** · 06-06-2020, 08:52 AM

Did a quick search for this question but found nothing. My new dometic refrigerator will not work on LP. I never tested it until I needed it. When I switch over to LP. You can hear the ignition but no light.

Here's what I have so far:
Display indicates NO FL.
Ignition is verified to be sparking in the correct place.
The turn knob by the regulator is in correct position.

I do not hear the gas when trying to light but I am hard of hearing so that don't mean much.

I even tried pointing my torch lighter toward the spark when trying to light with no luck.

Lp does have pressure to all other appliances (water heater and stove/oven)

**LV Naturist** · 06-06-2020, 09:03 AM

'Morning Jquillen! As you probably know, NO FL means there is no propane flow to the fridge. Simple things first... You say you have flow to the stove and water heater. The easiest way to verify that is to light the stove. Since the stove and fridge is in the slide you'll at least know you have propane to the slide. Look under the slide. Sometimes the propane hose under the slide gets kinked and needs to be repositioned to relieve the kink. Those are the simple things to check and I'm sure others will chime in with other suggestions... Keep us informed.

John

**livinthelife** · 06-06-2020, 11:26 AM

Originally Posted by Jquillen

Did a quick search for this question but found nothing. My new dometic refrigerator will not work on LP. I never tested it until I needed it. When I switch over to LP. You can hear the ignition but no light.

Here's what I have so far:
Display indicates NO FL.
Ignition is verified to be sparking in the correct place.
The turn knob by the regulator is in correct position.

I do not hear the gas when trying to light but I am hard of hearing so that don't mean much.

I even tried pointing my torch lighter toward the spark when trying to light with no luck.

Lp does have pressure to all other appliances (water heater and stove/oven)

Our fridge stopped working on propane early on. My husband took it apart and found the orifice blocked. After blowing it out, and reconnecting, it works fine.