User Tag List
Thanks: 0
Likes: 0
Results 1 to 6 of 6
Thread: Adding external access door
-
06-14-2020, 10:28 PM #1
- Join Date
- Jun 2020
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Adding external access door
2020 28BH Has anyone added an external storage access to the space to the left of the sink. The space is a large area that is super difficult to access from the cupboard under the sink.
-
06-15-2020, 08:37 AM #2
Before you dive in, get a diagram of that wall to see where the framing is! You don't want to be like the knucklehead on YouTube who literally cut all the support out of his slide box to put in outside acess!!!
Rob & Nikki + Cloverfield
2020 Grand Design Solitude S-Class 3350RL
2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN
Mountains of Pennsylvania
-
06-16-2020, 09:50 AM #3
If you do that, let me know. That would be a neat mod and quite handy. I am still considering the area in the bunk room that is behind the outside kitchen, between the double drawers under the lower bunk, and the back wall of the camper as well. The same concerns with frame, etc apply, but unlike the kitchen that can at least be used, this seems to be a large dead space.
2019 F350 6.7L PS SRW CCSB Platinum
2021 28BH with theater seating and 2nd AC
2019 Imagine 2400BH w/solar (sold)
https://rolling.howardweb.info/
-
06-16-2020, 11:06 AM #4
- Join Date
- Aug 2017
- Location
- Florida Space Coast
- Posts
- 3,879
- Blog Entries
- 1
- Mentioned
- 94 Post(s)
- Tagged
- 0 Thread(s)
Maybe someone here knows if there are structural supports in the outside wall where you want to cut, maybe not. Maybe calling GD you can find out... maybe not.
You can - assuming you can get in the interior area you want to cut - use a utility knife and cut away the luan wood pane from the styrofoam. Then you'll know if there is any support in that wall. Then you can make some pilot holes from the inside and return to the outside and cut away.
I did that for my microwave vent and discovered some metal that was there to support the microwave. Fortunately it didn't prevent me from cutting a vent hole.
And I did cut a hole where my electric receptacle on the side of the rig was so I could put in a cord reel. I didn't find any metal structural support but did discover that the 'high quality' Amish worker who drilled the hole in the side of my rig for the 50 amp receptacle missed the blocking inside the wall by a good 2 inches thus totally missing the mark and only securing things to fiberglass rather than the wood blocking as intended. argh.....
Good luck. I hope it works out.Larry KE4DMG
2022 F-350 KRU SRW LB - Airlift 5000+, ForScan, 37 RDS Aux Tank,
2019 310GK-R - Sailuns; MorRyde IS; Disc Brakes; 20K Reese Goosebox
Search kalakamods for my mods
-
06-16-2020, 12:37 PM #5
-
06-16-2020, 03:55 PM #62019 F350 6.7L PS SRW CCSB Platinum
2021 28BH with theater seating and 2nd AC
2019 Imagine 2400BH w/solar (sold)
https://rolling.howardweb.info/
Water coming from inside the...
Today, 06:18 AM in Plumbing and Water Systems