Quote Originally Posted by Mitch Booth View Post
John and Denise,

Can you elaborate on the jumpers used? I use Dish and ran 3 HDMI cables from an HDMI splitter next to the satellite box to each tv location. Running the HDMI cables was extremely labor intensive running through the underbelly and through the back fake wall of the entertainment center. I’m not sure if there is an easier way or not. I tried using two cable boxes but Dish has a hard enough time keeping one working let alone the secondary receiver. I’m fine having the same station on all 4 tv’s. Thanks for any advise or help. I also sent you guys a private message.

Mitch
The jumpers are coax from the DirecTV SWM splitter to each individual satellite connection in the convenience center. I have 4 receivers (one for each set) in the rig. I agree using one with HDMI runs would be a difficult setup to do. I would probably opt for wireless transmitters and receivers if I were only using one receiver to multiple sets.
John