Cracked tub in pass through storage

[Zed157]

Hello,

I am searching for replacements of the plastic tub just inside the passthrough storage door. Does anyone know a part number or manufacturer, all my searches so far have turned up bath tubs only..

Thanks!

[gbkims]

Hello,

I am searching for replacements of the plastic tub just inside the passthrough storage door. Does anyone know a part number or manufacturer, all my searches so far have turned up bath tubs only..

Thanks!

It's a Saddle Box in Parts Lookup: Exterior > Attachments https://www.granddesignrv.com/owner-...y/parts-lookup

2015 308BHS
560137 SADDLE BOX 32" BLACK ABS HC STARTING GAUGE .150 NLA
https://www.granddesignrv.com/owner-...s/detail/19488

2016 308BHS
560216 : SADDLE BOX 34" BLACK ABS HC STARTING GAUGE .150
https://www.granddesignrv.com/owner-...s/detail/24011

https://www.mygrandrv.com/forum/show...Improvement-or
https://www.mygrandrv.com/forum/show...t-Tray-Caution

[Randall lee]

The inside lip of the saddle is know for breaking when you pull something out, I picked up a alum step tread and cut it to fit and screwed it down with the same screws that were in it. For the outside I took a piece of alum flat stock and glued it to the top and screwed it back in.
[ATTACH=CONFIG]27908[/ATTACH
Not the best picture but you get the idea.

[Zed157]

It's a Saddle Box in Parts Lookup: Exterior > Attachments https://www.granddesignrv.com/owner-...y/parts-lookup

2015 308BHS
560137 SADDLE BOX 32" BLACK ABS HC STARTING GAUGE .150 NLA
https://www.granddesignrv.com/owner-...s/detail/19488

2016 308BHS
560216 : SADDLE BOX 34" BLACK ABS HC STARTING GAUGE .150
https://www.granddesignrv.com/owner-...s/detail/24011

https://www.mygrandrv.com/forum/show...Improvement-or
https://www.mygrandrv.com/forum/show...t-Tray-Caution

Awesome thank-you!

[Zed157]

The inside lip of the saddle is know for breaking when you pull something out, I picked up a alum step tread and cut it to fit and screwed it down with the same screws that were in it. For the outside I took a piece of alum flat stock and glued it to the top and screwed it back in.
[ATTACH=CONFIG]27908[/ATTACH
Not the best picture but you get the idea.

Great mod, will look to do that - thanks!

[2019SD]

I did some mods on mine...look under Mods and DIY section.

[WhittleBurner]

We also added the step tread when we replaced ours a couple years ago. We used large washers under the screws to distribute the force more evenly avoiding cracking around the screws. Easy and cheap fixes that extend the life of the box.