User Tag List
Thanks: 0
Likes: 0
Results 1 to 6 of 6
-
08-31-2020, 05:23 PM #1
- Join Date
- Aug 2020
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Grand Design Reflection 28BH Bunk House Door won't close
Hey. We just bought a reflection 28bh and went on our first trip. To our dismay, the bunkhouse door wouldn't close. It seems to be off the rail, but I couldn't get it back on. Any simple tips to get back on?
Thanks!
-
08-31-2020, 06:25 PM #2
- Join Date
- Jun 2020
- Posts
- 205
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Can you upload some photos? I had the top rail or a brand new 31mb pull out of the header. But send some photos and I’ll try to help.
+++++++++++++++++++
2016 Ram 2500 Cummins
Andersen ultimate
2020 GD 31MB
Champion dual fuel 3500 generator
Steadyfast stabilizers
Dinosaur electronics ignitor board
MicroAir Easy-Start2020 Reflection 31MB
2016 Ram 2500 Cummins
-
08-31-2020, 07:26 PM #3
-
08-31-2020, 09:06 PM #4
- Join Date
- Jun 2020
- Posts
- 205
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I can’t really tell here. Is the door off the sliding pegs? Or did the bracket pull away from the header? I had to watch some YouTube videos because I didn’t really know how those pins attached to the door. Once I figured that out, it was easy to remove and then also attach the door to the sliding pins on the track.
+++++++++++++++++++
2016 Ram 2500 Cummins
Andersen ultimate
2020 GD 31MB
Champion dual fuel 3500 generator
Steadyfast stabilizers
Dinosaur electronics ignitor board
MicroAir Easy-Start2020 Reflection 31MB
2016 Ram 2500 Cummins
-
09-01-2020, 01:36 PM #5
- Join Date
- Aug 2016
- Location
- Henderson NV
- Posts
- 895
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Link is for illustration purposes. What typically happens is the door bracket falls off the wheel pin. Refer to the picture in the link and you'll see what I'm talking about. Sometimes the plastic lock breaks and you have to replace at leas the door side. You'll have to man handle the door to get it to slide far enough to access the rollers, but it is a relatively easy repair. Hope that helps...
https://www.amazon.com/RV-Designer-H.../dp/B002UBZL1U
https://www.amazon.com/RV-Designer-1...N5ZQ0RB2ZECXGD
JohnLast edited by LV Naturist; 09-01-2020 at 01:38 PM.
2018 Silverado LTZ 3500HD CC LB 4X4 DRW Duramax/Allison
2019 Momentum 381M w/Full Body Paint
2016 Can Am Spyder F3 Limited Special Series
2017 Can Am Outlander 1000 XT-P
2016 Wrangler Hard Rock Unlimited
1997 Bayliner Capri 1950 affectionately named Skinnydipper
MSgt, USAF (Ret)
[SIGPIC][/SIGPIC]
-
07-05-2023, 07:01 PM #6
- Join Date
- Jul 2017
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
This issue just happened on our 28bh after going on some dirt roads. The door came off the track and got stuck in the open position. The track is a little bent and needs replaced, but in order to get to the track and replace it, I need to get the door off. Hoping to replace the track if my arm can fit in the skinny space. My question: Is there a way to remove the door from the rollers without having to remove panels? Any help is greatly appreciated. Thank you!
Breakaway Switch Question
Today, 11:24 AM in Axles, Brakes, and Suspension