User Tag List
Results 1 to 2 of 2
Thread: Shade replacement
-
09-05-2020, 08:48 AM #1
- Join Date
- Jun 2020
- Posts
- 3
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Shade replacement
I'm trying to replace a failed pull down shade assembly on our 2020 2970rl. I'm lost on how to access it. Can anyone who has done this help out?
Sent from my SM-G965U using TapatalkLast edited by kbr5881; 09-05-2020 at 12:49 PM.
-
09-05-2020, 07:52 PM #2
- Join Date
- Aug 2017
- Location
- Michigan
- Posts
- 185
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Hi. We have a 2018 337rl Reflection. On our roller shades there are spring loaded push taps on the bottom of the brackets that the shades mount to. Push up on the tab and the shade bottom should be able to move outward then being able to remove shade. To reinstall put top of shade into the top lip of the bracelet and push buttons up to look shade back in.There isn’t a lot of room to deal with removing the shade. I removed the valance and it was real easy to deal with the shade. My shade brackets were real loose. I hope I didn’t confuse you but it is simple to replace a shade the real issue is everything is a tight fit. Good luck. Jim (checkmate)
2018 Reflection 337RL / 2022 GMC Denali 3500HD CC LB Diesel
Bedroom Sconce Light
Today, 05:09 PM in Electrical System and Wiring