User Tag List
Thanks: 0
Results 1 to 6 of 6
Thread: Intermittent return on slide
-
09-29-2020, 05:42 PM #1
- Join Date
- Jul 2020
- Location
- Maryland
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Intermittent return on slide
Has anyone had problems with large kitchen slides on 2016 384 returning. Slides return 3/4 of the way then stops. Wait 10 seconds to engage switch and then full return. Checked amps of battery (full charge), battery shut off on the open position. Had done this the last four times when closing the unit. Looking for help
-
09-29-2020, 05:57 PM #2
It might be your slide motors are out of synch. Check out this thread that might help
https://www.mygrandrv.com/forum/show...lide-on-2800BH
Here’s a YouTube to re-synch the motors
https://www.youtube.com/watch?v=hSafAnjxIV42010 Tundra SR5 DC 5.7L 4x4
2020 Imagine XLS 22MLE
Andersen WDH
Dexter E-Z Flex Suspension Kit
2018 Rockwood Mini Lite 2104s
2014 Jayco x17z Hybrid
-
09-29-2020, 06:00 PM #3
- Join Date
- Jul 2020
- Location
- Maryland
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Great thought. Thanks for the input. Didn’t think about that
-
09-29-2020, 06:46 PM #4
If it's not a Schwintek slide, it wont be out of synch. Being a 2016, I'd be willing to bet your auto-resetting 12v circuit breaker needs to be replaced. Replace it with an 80A and you should be good to go. This was discussed a few years ago and GD now uses an 80A breaker for the hydraulic pump.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
09-30-2020, 07:06 AM #5
- Join Date
- Jul 2020
- Location
- Maryland
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
You are correct that the slides are not schwintek. I will try the 80 amp breaker. Thanks for the input.
-
09-30-2020, 07:07 AM #6
- Join Date
- Jan 2018
- Location
- Salado, Tx
- Posts
- 55
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Totally agree with FT4NOW.. Just had the exact problem with my Kitchen Slide and leveling legs on my 2018 Solitude 310GK. See posts in Electrical systems. Replaced 50 amp Breaker with 80 Amp auto reset Breaker after Speaking to Lippert Techs and reading posts on this Forum. Resolved the issue. Orbiker and CoCHRIS posted Great Photos and gave Excellent descriptions on how to change the Breaker.
[SIGPIC][/SIGPIC]
Mike and Jane, Two retired Educators/ One retired Army Aviator
3 Mini Tri AUSIES
2018 310 GK 2019 Chevy Duramax 3500 4W/D SRW L/B
BW 18000 lb Hitch, BACKFLIP TONNAU
What changed for the new GD...
Today, 02:39 PM in General Discussion