User Tag List

Results 1 to 6 of 6
  1. #1
    Left The Driveway
    Join Date
    Jul 2020
    Location
    Maryland
    Posts
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Intermittent return on slide

    Has anyone had problems with large kitchen slides on 2016 384 returning. Slides return 3/4 of the way then stops. Wait 10 seconds to engage switch and then full return. Checked amps of battery (full charge), battery shut off on the open position. Had done this the last four times when closing the unit. Looking for help

  2. #2
    Rolling Along Tigger1's Avatar
    Join Date
    Sep 2019
    Location
    MD
    Posts
    734
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Lstickles View Post
    Has anyone had problems with large kitchen slides on 2016 384 returning. Slides return 3/4 of the way then stops. Wait 10 seconds to engage switch and then full return. Checked amps of battery (full charge), battery shut off on the open position. Had done this the last four times when closing the unit. Looking for help
    It might be your slide motors are out of synch. Check out this thread that might help
    https://www.mygrandrv.com/forum/show...lide-on-2800BH

    Here’s a YouTube to re-synch the motors
    https://www.youtube.com/watch?v=hSafAnjxIV4
    2010 Tundra SR5 DC 5.7L 4x4
    2020 Imagine XLS 22MLE
    Andersen WDH
    Dexter E-Z Flex Suspension Kit
    2018 Rockwood Mini Lite 2104s
    2014 Jayco x17z Hybrid

  3. #3
    Left The Driveway
    Join Date
    Jul 2020
    Location
    Maryland
    Posts
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Great thought. Thanks for the input. Didn’t think about that

  4. #4
    Paid my dues 😁 FT4NOW's Avatar
    Join Date
    Sep 2016
    Posts
    4,570
    Mentioned
    136 Post(s)
    Tagged
    0 Thread(s)
    If it's not a Schwintek slide, it wont be out of synch. Being a 2016, I'd be willing to bet your auto-resetting 12v circuit breaker needs to be replaced. Replace it with an 80A and you should be good to go. This was discussed a few years ago and GD now uses an 80A breaker for the hydraulic pump.

    Sent from my SM-G950U using Tapatalk
    2023 Momentum 398M-R
    2023 Ford F-450

    SOLD - 2021 Reflection 311BHS
    SOLD - 2017 Momentum 399TH

  5. #5
    Left The Driveway
    Join Date
    Jul 2020
    Location
    Maryland
    Posts
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    You are correct that the slides are not schwintek. I will try the 80 amp breaker. Thanks for the input.

  6. #6
    Fireside Member 1st Cav Duke's Avatar
    Join Date
    Jan 2018
    Location
    Salado, Tx
    Posts
    55
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Lstickles View Post
    Has anyone had problems with large kitchen slides on 2016 384 returning. Slides return 3/4 of the way then stops. Wait 10 seconds to engage switch and then full return. Checked amps of battery (full charge), battery shut off on the open position. Had done this the last four times when closing the unit. Looking for help
    Totally agree with FT4NOW.. Just had the exact problem with my Kitchen Slide and leveling legs on my 2018 Solitude 310GK. See posts in Electrical systems. Replaced 50 amp Breaker with 80 Amp auto reset Breaker after Speaking to Lippert Techs and reading posts on this Forum. Resolved the issue. Orbiker and CoCHRIS posted Great Photos and gave Excellent descriptions on how to change the Breaker.
    [SIGPIC][/SIGPIC]
    Mike and Jane, Two retired Educators/ One retired Army Aviator
    3 Mini Tri AUSIES
    2018 310 GK 2019 Chevy Duramax 3500 4W/D SRW L/B
    BW 18000 lb Hitch, BACKFLIP TONNAU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.