6 volt battery suggestions

**RamGunner** · 06-14-2015, 01:45 PM

Rob,

Do you have the part numbers for those items? How much were they? That sounds like exactly what we need to do.

**Cate&Rob** · 06-14-2015, 03:02 PM

Hi RamGunner,

These are Reflection parts, so I don't know for sure if they are the same as Momentum.
The parts were really inexpensive . . . my dealer may have passed these through to me at cost. All of the following totalled less than $50.
15005 Battery Box (the top and the bottom are exactly the same so you need two of these)
310001 Vent - Battery Wall Mount Black
310003 Vent - Battery Face Plate Black
620013 Hose - 1 3/4" Vent (3 ft)
I did not get installation screws and the weatherstrip pieces for between the box halfs from GD.

Rob

**RamGunner** · 06-14-2015, 03:32 PM

Thank you. I'm going to see what ends up being on our Momentum on Friday.

scott42blue · 06-14-2015, 07:06 PM

I searched for a long time to find a non vented battery box that would hold two Trogan 6 volts with no luck.
I ended up getting a nice quality marine box. I filled unneeded cable outlets with a epoxy filler vented top and bottom and added sealing strips to top. Not perfect but much better than factory RV box as far as being air tight. It also has nice T handles (2) for checking water level.
AGM requires venting to be ABYC approved, that means they can go boom just like any other type battery.
Scott