User Tag List
Results 1 to 10 of 11
-
10-06-2020, 06:33 PM #1
- Join Date
- Sep 2020
- Posts
- 42
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
10-06-2020, 07:20 PM #2
- Join Date
- Aug 2020
- Location
- Arizona
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I used a motorcycle wheel chock bolted to a 1.5" steel angle iron with slots cut to fit over garage floor tie down loops for my 2010 Honda ST1300. Tie down hooks kept wheel chock and bracket close to floor and allowed straps to help with side to side movement. Also, used a set of straps in back with any chock. Took it from PHX to Fayetteville, NC and back without a bit of problems. I don't have any pictures of the bike in the trailer, but could send one of chock and bracket if you're interested.
-
10-06-2020, 07:55 PM #3
- Join Date
- Sep 2020
- Posts
- 42
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
10-07-2020, 07:12 AM #4
- Join Date
- Jul 2020
- Posts
- 23
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
10-07-2020, 08:49 AM #5
- Join Date
- May 2020
- Posts
- 11
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
10-07-2020, 08:53 AM #6
- Join Date
- Jul 2020
- Posts
- 23
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
10-07-2020, 09:02 AM #7
- Join Date
- May 2020
- Posts
- 11
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
From their Website:
Biker Bar - Complete Unit
MC2301 Harley Davidson FL Models - All Years
and other makes of touring bikes
with frame diameter of 1.125” - 1.250”
and frame width of 10” - 14.5”
MC2302 Harley Davidson FX, FLST, and VR Models - All Years
MC2303 Harley Davidson XL and XR Models - All Years
MC2304 Models with 1.5” Custom Tubular Frame
Biker Bar - Clamp Bar Only
MC2301B Motorcycle Clamp Bar - Touring
1.125” - 1.25” Tube Frame Diameter
10”-14.5” Frame Width
MC2302B Motorcycle Clamp Bar - Softail
1.25” - 1.375” Tube Frame Diameter
10” - 14.5” Frame Width
MC2303B Motorcycle Clamp Bar - Sportster
1.25” - 1.375” Tube Frame Diameter
4.5” - 7” Frame Width
MC2304B Motorcycle Clamp Bar - Custom
1.375” - 1.5” Tube Frame Diameter
10” - 14.5” Frame Width
Biker Bar - Base Assembly Only
MC2300 Biker Bar Base with Anchor Plates
Anchor Plate
MC2305 Motorcycle Latch Anchor Plate Set
It looks as if they are HD centric, but if metric, and frame dimensions are within spec, then it'll work. I agree that it's the best solution out there...
https://www.bwtrailerhitches.com/sit...ar%20Model.pdfLast edited by RonH1031; 10-07-2020 at 09:08 AM.
-
10-07-2020, 06:38 PM #8
- Join Date
- Aug 2020
- Location
- Arizona
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I hope these pictures help. The brown angle iron is too short for my 351M. I would need a longer one to fit in my new garage. It worked great in my previous bumper pull toy hauler.
-
10-10-2020, 12:34 PM #9
- Join Date
- Sep 2020
- Posts
- 42
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
This is all really helpful! Thank you! [emoji4]
-
11-04-2022, 01:45 PM #10
- Join Date
- Mar 2016
- Location
- Eastern Canada
- Posts
- 241
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Challenge with GM Rear Trailer...
Today, 06:46 AM in Electronics