Mount for Furrion 7" monitor/display in Ford Truck

[geotex1]

I made a custom mount for my RAM. You have two choice for a ball that can adapt to a standard 1" - either have one 3D printed for which there is an open source instruction set available, or have one machined. I had mine machined from billet aluminum and gave it a non-slip surface with bead blasting.

[luckyl]

I have mine in the left bottom on the windshield with the monitor JUST touching the dash. Taped the cables to the dash with Velcro. No view interference whatsoever.

[JTWILCOX]

This is what I use, and after 35K, still love it. Holds my TPS, Display, and GoPro

This goes on the Dash

https://www.builtrightind.com/produc...015-ford-f-150


Then I use RAM mounts ( Balls and arms ) for each item

https://www.rammount.com/components

[bryanvdh]

I used this in the storage tray above the radio, fits nicely and holds the 7" screen right above the dash so it doesn't obstruct visibility - https://www.amazon.com/gp/product/B0772CR74K/

[PaulKuda]

First I preface this with we have a Chevy and a Haloview, but the answer would likely be the same or similar since I looked at the furion too and would have done something similar. Ram Mounts. B sized 1" balls

[Foothiller]

I bought a 7" monitor and camera on Amazon for about $150. It seems to work well from the back of my 33' 5th. I like how the monitor fits in my F150's center dash depression. From where I sit, it only obscures about 1" of road above the hood. https://amazon.com/gp/product/B07H3P...?ie=UTF8&psc=1

[RSteele]

I bought a beanbag car dash mount from amazon. The suction cup mount connects to the bean bag and doesn’t move. I put the screen on my center console so it’s closer to me. I keep the furrion cameras in 4 camera mode when driving. The fourth camera is mounted in the bed of the truck so I can see the gooseneck ball when hooking up. Bean bag works great.

[Berky462]

I have a magnetic mount made for cell phones on my dash above the radio.
I added one of the stick on metal plates to the back of the Furrion monitor.

[ggrant119]

Installed mine in that useless holder above the display. I powered it with the ford factory upfitter switch. This works great and looks almost factory.

Sent from my SM-G986U using Tapatalk

[openrangeowners]

Installed mine in that useless holder above the display. I powered it with the ford factory upfitter switch. This works great and looks almost factory.

Sent from my SM-G986U using Tapatalk

I like how you elevated it a little with the plate/block below the display. Good idea with the outfitter switch too.