User Tag List
Thanks: 0
Likes: 0
Results 1 to 8 of 8
Thread: Slide issues on 303 rls
-
10-29-2020, 10:17 AM #1
- Join Date
- Mar 2020
- Location
- Deer Island, Oregon
- Posts
- 167
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Slide issues on 303 rls
just took my 303 rls 5ver into the shop for slide issues. Had read before of problems with Shwintec slides getting out of sync or square. Mine started doing that and would only move intermittently. They tell me both motors ned replacing. Three weeks to get the motors. Also the drivers side, kitchen slide is tearing the front bottom edge up. Have to pull the slide to fix. All this as we are in the SW for winter. Fortunately it is still under the 1 yr warranty. Anyone experienced a issue with the guide edge being torn up on a kitchen slide? Does three weeks for parts sound normal?
-
10-29-2020, 05:19 PM #2
- Join Date
- Mar 2020
- Location
- Deer Island, Oregon
- Posts
- 167
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Gotta reply to my own post..read up on shwintec slides, controllers. Watched some utube videos. I pulled the motor I thought was not working right. It ran intermittently like the other. I squared up the slide to even. Reinstalled the motor. Pulled power feed from controller, (it showed error #8 , motor 1), plugged back in 30 sec later. Ran slide out and in four times. It re synced and is working good now. Wondering why the shop thinks I need two new motors?
-
10-29-2020, 05:33 PM #3
- Join Date
- Mar 2020
- Location
- ON & QC Canada
- Posts
- 4,768
- Mentioned
- 38 Post(s)
- Tagged
- 0 Thread(s)
Steph & Lise
2019 F150 Lariat 2.7 EB
2020 Imagine XLS 22MLE
-
09-05-2021, 01:27 AM #4
- Join Date
- Apr 2019
- Location
- Mill Creek, WA
- Posts
- 21
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
2019 Reflection 303RLS
2016 F350 SD Diesel, 6 3/4’ Box
B&W Gooseneck ATU
-
09-06-2021, 02:03 PM #5
- Join Date
- May 2014
- Location
- NW AL/NE GA Mountains
- Posts
- 2,083
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
They may have rollers toward the front edge that you cannot see from above. May have to take a forklift and take the slide out to replace them.
-
09-06-2021, 10:00 PM #6
- Join Date
- Mar 2020
- Location
- Deer Island, Oregon
- Posts
- 167
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Alan and Paula
2019 Reflection 303 RLS, 2004 Dodge 3500 5.9L
Magnum 2k watt inverter-charger, 300 AH Battle Born battery bank, 560 watt solar power. 6K axles and disc brakes. Pepwave max transit cellular router.
-
09-13-2021, 05:42 PM #7
- Join Date
- Jul 2020
- Location
- Northeast, OH
- Posts
- 103
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
2018 303rls
On ours the kitchen slide started tearing the flooring near the island as it went in and out. I scheduled and returned it to Grand Design and they replaced the floor. Other issues; Lippert repaired a broken spring mount and reinforced all the other mounts. Multiple trim pieces needed repairs. We have had no problems with any of the slide controls or motors. Fireplace did not cycle, just either on or off. GD replaced it. Recalls for microwave backer and basement wiring. Hot water tank control board died, warranty denied by Dometic 3 months out of the 2 year warranty. Anything else was self inflicted. My only complaint is with Dometic and their failure prone control boards.
BrianBrian & Shea+ Zeke & Roxy GSP’s
2018 GD Reflection 303RLS 800w solar 400ah LiFePO4
Sold 2018 Ford F-250 CCSB Lariat gas 2,980# payload
2024 Ford F-350 4x4 CCSB Lariat diesel 4,000# payload
-
09-20-2021, 07:45 PM #8
- Join Date
- Oct 2020
- Location
- New England
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Rust prevention on rotors over...
Today, 06:36 PM in Axles, Brakes, and Suspension