User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
-
12-18-2020, 06:56 PM #1
- Join Date
- Oct 2020
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Antenna amplifier has 12 volts out but no 12 volts at antenna
Hello, I have the King basic antenna and the amplifier/injector in the bedroom of my 2018 Reflection 230RL. Previously the original amplifier/injector had several cracked solder joints. I reheated and it worked fine and powered the antenna.
Several months pass and after one trip I discovered I have no power again at the antenna. No power coming out of amplifier/injector so I replaced with a new Winegard. I now have power coming out of amplifier/injector, but still no power at the antenna. I pulled the antenna head and tested the coax and no power.
Do you think there are any additional connections to check? As I recall there is one connection in the base of the antenna that looks to be impossible to get to without ripping off the antenna. I do not have the signal meter model so it is just a one-to-one connection. Does anyone know if there are any other spliters or connections from the amplifier/injector to the antenna or is it a straight line? I am not sure what to do next, any suggestions? At this point I am ready to get an external setup or go satellite. Thank you.
-
12-19-2020, 03:34 AM #2
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
Maybe the Coax? - https://www.mygrandrv.com/forum/show...l=1#post123118
- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
Anyone Else Getting Tired of all...
Today, 03:27 AM in General Discussion