User Tag List

Page 3 of 12 FirstFirst 12345 ... LastLast
Results 21 to 30 of 112
  1. #21
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Back to work! Several projects over the past couple of weeks. Got the rear Step Above steps and storage box done. Changed out both bath faucets to the Glacier Bay Mandouri 4 in. 2-Handle LED faucets. Pretty cool little faucets. Little wheel in the head is turned by the water flow powering the leds. Added some heavy duty peg board in the outside storage and got the tubs arranged for that area. Also added the Poles and Holders 22' flag pole with ladder mount. Added some extra tall bumpers on the ramp to hold it up off the ground more since we are mostly boondocking. Also added a 3rd bumper in the center of the ramp. Finally de-winterized and starting to move in. The wife got to make the bed. Soooo ready to go camping!















    Last edited by TerryH; 03-13-2021 at 08:36 PM.
    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  2. #22
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Completely forgot to add that the dealer got the front cap changed out and worked on the rest of the warranty list. Everything is good now except for what I thought was going to be a loose arm on the theater seat turned out to be a broken frame. Obviously GD threw it in there knowing it was broken. Don't see much of any other answer. Anyway, new theatre seat is on order. I also had them install the CRE3000 equalizers and the wet bolt kit while it was there.



    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  3. #23
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Forgoing working on any more mods in lieu of actually going camping in the thing this weekend! Did put the Sharkbite ball valves on the fresh water overflows. Water was literally siphoning out the front overflow with the trailer just sitting in my drive way. Super simple way to keep water in the tanks. Just have to remember to open them back up as soon as I get to the spot.



    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  4. #24
    New Member
    Join Date
    Mar 2021
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Did you put a backing plate on the underside for the E-track in the garage? Trying to come up up with a good solution to secure my RZR with wheel nets.

  5. #25
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by JasBell View Post
    Did you put a backing plate on the underside for the E-track in the garage? Trying to come up up with a good solution to secure my RZR with wheel nets.
    Did not. The floor is 1" marine grade underlayment. I pre-drilled the holes and used 1 1/4" lag screws. 92 of them total. I'm 100% confident it's not going anywhere. We towed miles of terrible dirt roads this weekend to get to a camping spot with no movement at all.
    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  6. #26
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    I swapped the Wyfco converter/charger for the more advanced and more powerful Progressive Dynamics 60 amp. Much to my surprise, there was just enough room to put the PD in the same spot the Wyfco was. Very simple switch. Even enough room inside the fuse box for the remote for the PD.







    Last edited by TerryH; 03-25-2021 at 07:30 AM.
    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  7. #27
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Added propane quick connect for the wife's Blackstone today. Was hoping for an blank spot in the manifold but no port available. Decided to tee after the regulator by the tanks. Unfortunately Lowes selection of fittings is poor so was more complicated than I'd hoped for but it worked out. Was able to run right along side the main line coming rearward by changing out the insulated cable clamps securing it to larger ones and adding a few zip ties. Used another insulated cable clamp to secure the quick connect to one of the standoffs on the side skirting. Worked out pretty well. Also changed out the rubber lines to the tanks with stainless while I was there. Spend about $100 or so total.

    https://www.amazon.com/dp/B08QRF6DRQ...roduct_details

    https://www.amazon.com/GASPRO-Quick-...-garden&sr=1-3

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1















    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  8. #28
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Decided I'd tackle doing the sound deadening on the generator box today. Pretty straightforward deal. Removed the OSB cover under the bed. Removed the fiberglass insulation. That was fun...not. Used the Noico 80 mil butyl sound deadening material to cover the top, back and left side of the gen box. Helped quite a bit especially with the vibration. The gen is certainly not quiet now but definitely better. Well worth the money and time.

    Sound deadening panels: https://www.amazon.com/Noico-deadeni...s%2C201&sr=8-5

    Roller: https://www.amazon.com/Noico-Install...ZJFXEBE9RHRYBA



    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

  9. #29
    Long Hauler geotex1's Avatar
    Join Date
    Sep 2019
    Posts
    2,837
    Mentioned
    83 Post(s)
    Tagged
    0 Thread(s)
    Great mods! Thanks for taking the time to photo-document and share! I find myself doing dozens of mods every season, but just don't find the time to record the steps. Nikki generally shares just the results over on FB. Lol.
    Rob & Nikki + Cloverfield
    2020 Grand Design Solitude S-Class 3350RL
    2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN

    Mountains of Pennsylvania

  10. #30
    Site Sponsor TerryH's Avatar
    Join Date
    Sep 2020
    Location
    Springdale, Ar
    Posts
    632
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by geotex1 View Post
    Great mods! Thanks for taking the time to photo-document and share! I find myself doing dozens of mods every season, but just don't find the time to record the steps. Nikki generally shares just the results over on FB. Lol.


    Thanks Rob!
    2021 Momentum 31G
    2021 20' Haulmark Edge race trailer
    '17 Ram CCLB 3500 dually 6.7 turbo
    '96 Chevy C3500 CC dually 454
    2019 Honda Talon X
    1985 Honda FL350R Odyssey

Page 3 of 12 FirstFirst 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.