User Tag List
Results 31 to 40 of 112
-
04-04-2021, 11:03 AM #31
- Join Date
- Feb 2021
- Location
- Oregon
- Posts
- 31
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Great mods, thanks for sharing. I find lots of inspiration on this forum.
2021 Reflection 303RLS Pulled by 2019 F350 Crew cab diesel with Andersen hitch
Still own: 2010 Heartland Elkridge 34DSRL
-
04-04-2021, 11:07 AM #32
-
04-07-2021, 11:28 AM #33
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Sooo... Just in case anyone needed a laugh today I thought I'd post my screwup on this install. When I completed the install I verified at the lugs on the converter/charger that it was in fact outputting 14.4 volts. Decided I'd verify the battery voltage a couple of nights ago. Battery sitting at 12.34. What? Double checked the output at the lugs. Still 14.4/13.6 depending on mode. Took me forever to figure out that I had pushed the negative wire too far into the lug on the converter and had tightened the set screw down nice and snug on the insulation instead of the bare wire. Turns out it works perfectly if the connections are actually made.
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
04-11-2021, 09:09 PM #34
- Join Date
- Feb 2021
- Location
- Alberta, Canada
- Posts
- 16
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Love all these! Will be copying and pasting for sure...
2020 GMC HD3500 Denali Duramax SRW
2021 Momentum 21G
3 Young ones and a patient wife
-
04-12-2021, 08:35 AM #35
-
04-12-2021, 09:57 AM #36
- Join Date
- Nov 2013
- Location
- FL, rolling in early May
- Posts
- 8,141
- Blog Entries
- 19
- Mentioned
- 90 Post(s)
- Tagged
- 0 Thread(s)
Marcy & Gary
2014 Grand Design - Reflection 303RLS
2022 GMC 3500 Denali Duramax Longbed SRW
2015 GMC Denali 3500 - Retired
2003 F350 - retired
Michigan
We're in trouble now, the dog are bloggin'!
https://3dogsandatrailer.wordpress.com/
-
04-15-2021, 08:03 PM #37
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Finally broke down and bought the Victron BMV-712 bluetooth battery monitor. Installed it tonight. Super simple install once I finally figured out where to put the monitor itself. Doesn't really matter where it is as long as it's inside since it's bluetooth. I mounted the shunt in the battery box and ran the cable up into the gen box and mounted the monitor on the side of the bed frame facing the kitchen. Sealed everything up with black RTV. The monitor can measure how much current is going in and out of the battery as well as the amp hours used. Takes the guessing out of the true state of charge.
https://www.amazon.com/dp/B075RTSTKS...roduct_details
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
04-15-2021, 08:19 PM #38
We have been part timing it and dropped ours off last week for the 2nd ac and some warranty work. I still need to install the battery box and the victor monitor. Have a few mods I need to do before it’s full on summer here. Once I get it back from the shop I’ll post all my mods. Thanks for the great ideas!
Sent from my iPhone using Tapatalk
-
04-15-2021, 09:16 PM #39
-
04-20-2021, 09:03 PM #40
What changed for the new GD...
Today, 02:39 PM in General Discussion