User Tag List
Results 81 to 90 of 112
-
03-26-2022, 09:09 PM #81
-
04-03-2022, 10:40 AM #82
- Join Date
- Nov 2021
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
04-03-2022, 12:37 PM #83
-
05-15-2022, 04:21 PM #84
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
7 weeks out from surgery, I finally have a knee that operates close enough to normal to get back on some projects. The main one being the inverter/charger and 300ah Chins lithium battery I've had for a few months. I'm using the little bit of space under the bed for the battery and the lower part of the closet in the master for the rest of the equipment. Today was battery compartment day. First order of business was to at least somewhat deal with the rats nest of wiring behind the Nautilus panel. After that I secured the entire lower bed structure with lots of 2 1/2" deck screws as the staples just aren't going to cut it for me. I ripped some 2x4's in have and used that for structure to hold the battery. Decided I'd make a removeable rear wall to give some measure of separation from the plumbing just in case there was a leak that might be spraying water on the battery. A grove in the 2x2's to allow a piece of ATP to slide in worked well. I can just slide it out if/when I have to deal with any issues on the Nautilus. Pretty happy with how it came out. Also got the backer boards for the inverter and Lynx distributor sprayed with bed liner and began that install. Long way to go but it feels good to b4e well enough to get back on the project.
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
05-21-2022, 04:45 PM #85
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
Continuing on the inverter project toady. Got the electronic components installed in the lower part of the bedroom cabinet. Kind of a wasted space so wanted to use it but what a pain it is to work in that little space. Still a ways to go but made some pretty good progress today. Got all the 12 volt side done except a few more wires to hook up under the trailer. Pouring rain here today is not very conducive to working outside. The inverter and the power in are mounted on 3/4" oak plywood that I sprayed with truck bed liner. Those panels are attached to the floor of the cabinet and to the backer for the drawer slides with some ATP on top and bottom that I cut and formed. I modded the power in to hold meqa fuses. Ran the 2/0 cables thru the generator compartment and up thru the floor to the equipment. Got the fuse holder installed on the battery. So far so good. I'll post again when it's finished.
Last edited by TerryH; 05-22-2022 at 08:10 AM.
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
06-12-2022, 08:56 AM #86
- Join Date
- Oct 2017
- Location
- Innisfil, Ontario
- Posts
- 389
- Blog Entries
- 3
- Mentioned
- 4 Post(s)
- Tagged
- 1 Thread(s)
Hi Terry, just want to confirm the hand rail you installed. It looks like a Stromberg Carlson AM-533 Lend-A-Hand Extended Assist Rail (402.1242). Is that correct?
It also appeared to bolt right up (I mean at least cover the old mounting holes so no patching was required).
Cheers
Tim2022 Momentum 25G (aka "Baby Mo")
2020 Ram 3500 Laramie SRW | 6.7 HO Aisin | 6’4” bed | 3.73 gears | air suspension | 3694# Payload
Blog Post: 1500 Pickup’s and Towing - The REAL numbers with example
Blog Post: 2016-2018 Imagine 2800BH - 3500 lb Axles Tire Rubbing Issues
-
06-12-2022, 05:01 PM #87
-
06-13-2022, 04:29 PM #88
- Join Date
- Oct 2017
- Location
- Innisfil, Ontario
- Posts
- 389
- Blog Entries
- 3
- Mentioned
- 4 Post(s)
- Tagged
- 1 Thread(s)
I noticed you hadn't installed any Maxx Air Vent covers. I love these on my current trailer and was planning on adding them to the 25G. Just wanted to check if you had looked into these and ran into any issues?
Maxxair 503.1504 (00-933069) Black Vent Cover2022 Momentum 25G (aka "Baby Mo")
2020 Ram 3500 Laramie SRW | 6.7 HO Aisin | 6’4” bed | 3.73 gears | air suspension | 3694# Payload
Blog Post: 1500 Pickup’s and Towing - The REAL numbers with example
Blog Post: 2016-2018 Imagine 2800BH - 3500 lb Axles Tire Rubbing Issues
-
06-13-2022, 08:06 PM #89
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
We have them. We opted for white. The work well.
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
09-28-2022, 07:26 AM #90
- Join Date
- Nov 2021
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Hi all. For those that did the skylight shade did you have to apply any sealant to the screws? Also, were you able to use the existing holes for the skylight or did you have to drill new ones? Thanx in advance!
Last edited by DASFREAK; 09-28-2022 at 09:00 AM.
Broken leafspring. Another….
Yesterday, 10:54 PM in Axles, Brakes, and Suspension