User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: Dining room slide.
-
03-22-2015, 06:59 PM #1
- Join Date
- Mar 2015
- Location
- Armstrong, BC, Canada
- Posts
- 19
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Dining room slide.
We have a 29RL Reflection. At the bottom of the slide it is not coming in all the way. It sticks out about 2 to 3 inches. The top of the slide comes in like they should. During the PDI at the dealer they said that was normal.
just doesn't look right. It sticks out so far I'm worried about the wind catching it and tearing off the moulding.
Any ideas on how to fix this?
-
03-22-2015, 07:17 PM #2
- Join Date
- Nov 2014
- Location
- Ellicott City, MD
- Posts
- 48
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I'd have the same concern about the wind catching it. I have a 303RLS and the slide is ahead of the wheel openings where the wall is straight so I don't have the same issue. Looks like the slide gasket is evenly compressed though so it can't close the gap any more than it is.
It also seems like a lot of sealant on the front section of the wheel opening molding. I would think that would've lined up with the straight wall much better than it appears.Kevin & Ginger
2015 Reflection 303RLS #1816
2018 Chevrolet Silverado / 3500HD DRW CC / Duramax
Anderson Ultimate 5th Wheel Connection
-
03-22-2015, 07:22 PM #3
- Join Date
- Nov 2013
- Location
- Gore Bay, Ontario
- Posts
- 2,171
- Blog Entries
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Welcome to the forum and congrats on your new camper.
Adjusting the dining room slide so that it's fully retracted top and bottom, side to side are easy adjustments for the dealer to do. The picture you posted shows that it's out too far at the bottom. Unfortunately you should have insisted for it to be corrected before you signed off on the PDI. I had them working on the kitchen slide for the same thing before I accepted our camper. You may as well wait until you've camped in it a couple times in case there's more things requiring attention.
DaveDave and Monica - Gore Bay, Ontario
Vitus the Hungarian Vizsla
2014 Reflection 337 RLS #129
2008 F250 V10 CC Lariat RWD
-
03-22-2015, 07:32 PM #4
- Join Date
- Mar 2015
- Location
- Armstrong, BC, Canada
- Posts
- 19
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks. We do have a couple of other small things to get taken care of. Will get them to do it then.
Similar Threads
-
Can i move the Dining room table?
By edmondpagan in forum General Tech TopicsReplies: 3Last Post: 11-03-2016, 08:23 PM -
357BHS slide out manual override location on bunk room slide
By Navymustang in forum General DiscussionReplies: 2Last Post: 05-29-2016, 10:03 PM -
Dining room slide doesn't close all the way
By hlozano in forum ExteriorReplies: 4Last Post: 05-05-2015, 12:18 PM -
2015 323BHS Dining Room Slide
By droidguru in forum General DiscussionReplies: 24Last Post: 10-27-2014, 08:12 PM -
Squeaky floor in dining room slide
By Weldersweetheart13 in forum General Tech TopicsReplies: 2Last Post: 10-22-2014, 06:37 AM
Rust prevention on rotors over...
Today, 05:50 PM in Axles, Brakes, and Suspension