Hi everyone Looking at this combination for my F250 Short Box with the Pullrite superglide.

The Retrax pro mx is 12- 13 inches into the box from the back window. It is 1 1/2 inches above the bed rail and almost 2 inches in to the bed on both sides for the rails. My questions are.
1- does anyone have this combination or close to it?
2- does the Pullrite head come close to hitting the retrax canister or cover when retracted back to straight on this short bed truck?
3. does the turning point trailair pin box clear the top of the bed with the extra 1 1/2 inches of the retrax rail
4. does the turning point trailair pin box high enough that it does not come close to the retrax rails that are 2" into the bed of the truck on both sides?

Thank you, in advance for your comments