User Tag List
Thanks: 0
Results 1 to 3 of 3
-
02-18-2021, 08:04 AM #1
- Join Date
- Mar 2016
- Posts
- 24
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Exterior Storage Box Attached to Landing Gear
Looking for the input on the downside and other suggestions for adding a fiberglass reinforced 1/4” plywood box that spans the front of our 5th wheel. I would attach it using square u-bolts to the landing gear in the front and to the frame rails on the rear of the box. I’m thinking it to be about 24”wide and 10” deep with three compartments - one opening from each side and one in the front.
Does anyone know where I could source fiberglass panels like are used for the trailer sides instead of plywood.Keith & Kate
Central Ohio
2015 Reflection 27RL 5th Wheel
2016 Ford F250XL Diesel Crew Cab SRW 4x4
-
02-18-2021, 09:22 AM #2
- Join Date
- Apr 2018
- Location
- The Independant State of Alberta
- Posts
- 709
- Mentioned
- 8 Post(s)
- Tagged
- 0 Thread(s)
-
02-18-2021, 12:22 PM #3
I would reconsider given the limited clearance as mentioned by the previous poster and the stress across the landing gear. I would be concerned the landing gear would eventually fatigue and cause issues with the jack movement over time.
frame flex problems
Today, 01:45 PM in General Discussion