User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2
  1. #1
    Seasoned Camper
    Join Date
    Jul 2018
    Reno NV
    0 Post(s)
    0 Thread(s)

    Slide bracket screws

    Just had this issue come up and I am not sure what to do. I noticed that when the single slide on or Imagine 2500RL is fully extended, the side bracket at the top is pulled out about a half of an inch. This is the bracket next to the actual slide room. In pulling out, about four screws have popped out from the top of the frame. I unscrewed one of the existing screws, and they are very short, less that one half inch long. I tried a couple of slightly longer screws to try to secure the bracket, but could not find any way for the screws to attach to anything. I hope this makes sense and was wondering if any other GDers have encountered this, and what needs to be done to secure this bracket


  2. #2
    Site Team Ynot4me2's Avatar
    Join Date
    Mar 2020
    ON & QC Canada
    38 Post(s)
    0 Thread(s)
    Maybe a picture would help. You might have to use larger (not longer) screws along with glue.

    Sent from my SM-P610 using Tapatalk
    Steph & Lise
    2019 F150 Lariat 2.7 EB
    2020 Imagine XLS 22MLE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.