User Tag List
Results 1 to 10 of 13
-
02-28-2021, 06:44 PM #1
- Join Date
- Feb 2021
- Posts
- 31
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Ideas on how to set up docking station
Hi I am new to this just bought a 2021 297 RSTS and looking at ways to set up the docking station with a filter and a regulator please post pictures and your ideas and thoughts thank you
-
02-28-2021, 06:55 PM #2
- Join Date
- Feb 2021
- Posts
- 31
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
02-28-2021, 08:21 PM #3
Ha, I recognize that picture, that's from my Momentum before I ripped out the Nautilus panel and redid the plumbing. I used that regulator daily for 3 years when we lived in our Momentum, never had any issues. You get what you pay for when it comes to regulators.
Here is the after picture from the rebuild.
Sent from my SM-G950U using Tapatalk
Attachment 324172023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
02-28-2021, 08:28 PM #4
- Join Date
- Feb 2021
- Posts
- 31
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-01-2021, 06:37 AM #5
- Join Date
- Nov 2017
- Location
- Toronto, Canada
- Posts
- 1,974
- Mentioned
- 54 Post(s)
- Tagged
- 0 Thread(s)
That attachment gives me the following error:
Invalid Attachment specified. If you followed a valid link, please notify the administrator
What regulator did you use in the original setup? Thx.Mark - 2018 Solitude 310GK - 2017 F-350 diesel SRW short box - Pullrite Superglide hitch
-
03-01-2021, 06:47 AM #6
- Join Date
- Nov 2017
- Location
- Toronto, Canada
- Posts
- 1,974
- Mentioned
- 54 Post(s)
- Tagged
- 0 Thread(s)
I'd add quick-connect fittings to that, at least one at the bottom where the park water supply connects.
I don't have a picture of mine, but if I did I wouldn't post it because it pales in comparison to @FT4NOW's.
However by employing a couple of brass elbows, a couple of 3' lengths of that excellent Flexzilla hose you seen in the photo, a bunch of quick-connects, and a regulator and pressure dial assembly with quick-connects, I've significantly reduced the time and fiddling involved in setting and breaking camp.Mark - 2018 Solitude 310GK - 2017 F-350 diesel SRW short box - Pullrite Superglide hitch
-
03-01-2021, 04:23 PM #7
-
03-01-2021, 04:52 PM #8
I'll try this again, hope it shows up. The regulator is made by Zurn Wilkins if I recall. I could only find it in 3/4" pipe which is why I used the reducers. I do have quick connect fittings now. I kept the regulator setup when I sold my Momentum, I havent installed it in the Reflection yet.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
03-01-2021, 04:52 PM #9
- Join Date
- Aug 2017
- Location
- Florida Space Coast
- Posts
- 3,879
- Blog Entries
- 1
- Mentioned
- 94 Post(s)
- Tagged
- 0 Thread(s)
Larry KE4DMG
2022 F-350 KRU SRW LB - Airlift 5000+, ForScan, 37 RDS Aux Tank,
2019 310GK-R - Sailuns; MorRyde IS; Disc Brakes; 20K Reese Goosebox
Search kalakamods for my mods
-
03-01-2021, 06:29 PM #10
- Join Date
- Mar 2018
- Location
- Near Pittsburgh, PA
- Posts
- 489
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Not sure exactly what you’re looking for, but here’s what I did. We put the pressure regulator on first, then the water hose. It doesn’t protect the water hose from high pressure, but I’d rather replace a $10 hose than a $50 regulator because someone saw it on the pedestal and decided that they wanted it more than I do...
Tom and Janice (known as Tom in PGH on the “other” forum)
First came the 18' Comfort bumper-pull, was great for 20 years.
Now a 2019 Reflection 303RLS, second air, double glass, table and chairs
2019 F350 Lariat (Diesel) 4x4 Crewcab with lots of goodies
Andersen aluminum with the puck system holding it all together
Cranberry Twp. PA, about 30 miles north of Pittsburgh
Need help with Imagine 2600 RL
Today, 10:46 AM in General Discussion