Basement Panel Fabric

[brandtb1919]

Has anyone out there found a source for a close match to the fabric GD wraps around the basement panels?

I plan to reconfigure my 2021 310GK basement to get a bit more usable space and my OCD won't allow me to not try to make it match.

Thanks!

Brian

[powerscol]

Has anyone out there found a source for a close match to the fabric GD wraps around the basement panels?

I plan to reconfigure my 2021 310GK basement to get a bit more usable space and my OCD won't allow me to not try to make it match.

Thanks!

Brian

Give GD customer service a call and they will tell you what they use. Have you vin handy. You can also do a parts look up on their site.

[Second Chance]

Two options: 1) I cut the existing panel and reconfigured the space without having to acquire any additional materials (other than some 1X for backing strips and some L-brackets). 2) Shops that do car audio installations carry the material for use as speaker covering (sub-woofers). I would try option #1 first and see if you need anything else.

Rob

[openrangeowners]

I used the following (slightly different grey than OEM but close enough) - same material though. Need 3M - 777 adhesive spray to attach it to the wood backing.

https://www.amazon.com/Polymat-Charc...4622312&sr=8-8

[brandtb1919]

I used the following (slightly different grey than OEM but close enough) - same material though. Need 3M - 777 adhesive spray to attach it to the wood backing.

https://www.amazon.com/Polymat-Charc...4622312&sr=8-8

Thank you openrangeowners. I have a roll on order now. Plus as Rob had mentioned, I will be able to re-use most of the fabric on the panels when I cut them.

Thanks for the feedback everyone!

Brian

[openrangeowners]

Thank you openrangeowners. I have a roll on order now. Plus as Rob had mentioned, I will be able to re-use most of the fabric on the panels when I cut them.

Thanks for the feedback everyone!

Brian

Photo shows OEM color and the Poly Mat I used on the reconfigured walls (area around pipe): Poly Mat is slightly lighter grey color.

[brandtb1919]

Photo shows OEM color and the Poly Mat I used on the reconfigured walls (area around pipe): Poly Mat is slightly lighter grey color.

That is close enough for me. I love the access panel cutout in the foreground as well. Thanks for the picture.

If there is anything I have learned over the years about RVs, it's that it is always a good idea to have quick access to the mechanicals and be familiar with the systems.

Brian

[openrangeowners]

The access panel covers my solar/inverter/battery installation - more Poly Mat there too


and

[Jims94vmx]

That looks great.

[openrangeowners]

That looks great.

Amazing how much room there is behind those basement panels .... and under our steps as well.