User Tag List


Results 1 to 6 of 6
Thread: 320g Wall Height
-
03-06-2021, 07:12 PM #1
- Join Date
- Nov 2017
- Location
- Pitttsburgh, PA
- Posts
- 359
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
320g Wall Height
Hey guys,
Shopping for a carport and im pretty sure my next rig will be a 320. I know the list height of a 320 is 13' 5" at the top of the AC units, but the real question is what is the height of the box itself. It should be the same front to rear because of the full profile.
The carport in question was going to have 12 foot legs, 14 feet wide, 4/12 pitch that will give me 14 foot 4 at the center . I'm pretty sure it will fit, but does anyone have the ability to measure the wall height? Couldn't find a good diagram on a search.
Thanks
Sent from my SM-G970U using TapatalkAndrew in the Burgh
2015 Reflection 317RST...Auction Rebuild
See Thread Here:
https://www.mygrandrv.com/fo...795#post145795
2016 F350 CCLB DRW 6.7
[SIGPIC][/SIGPIC]
-
03-09-2021, 06:48 PM #2
- Join Date
- Nov 2017
- Location
- Pitttsburgh, PA
- Posts
- 359
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Well, I committed to the 12 foot legs. Let's hope I'm right.
Sent from my SM-G970U using TapatalkAndrew in the Burgh
2015 Reflection 317RST...Auction Rebuild
See Thread Here:
https://www.mygrandrv.com/fo...795#post145795
2016 F350 CCLB DRW 6.7
[SIGPIC][/SIGPIC]
-
03-10-2021, 06:49 AM #3
- Join Date
- Jul 2019
- Posts
- 264
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I pick up my 320G on Saturday from storage. Ping me with a PM to remind me and I'll measure and send you the box height at the gutters if having the numbers before your shipment arrives helps.
-
03-10-2021, 06:06 PM #4
- Join Date
- Nov 2017
- Location
- Pitttsburgh, PA
- Posts
- 359
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Andrew in the Burgh
2015 Reflection 317RST...Auction Rebuild
See Thread Here:
https://www.mygrandrv.com/fo...795#post145795
2016 F350 CCLB DRW 6.7
[SIGPIC][/SIGPIC]
-
04-08-2021, 02:22 PM #5
- Join Date
- Nov 2017
- Location
- Pitttsburgh, PA
- Posts
- 359
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Bumping this up for anyone that can help.
Thank you.
Sent from my SM-G970U using TapatalkAndrew in the Burgh
2015 Reflection 317RST...Auction Rebuild
See Thread Here:
https://www.mygrandrv.com/fo...795#post145795
2016 F350 CCLB DRW 6.7
[SIGPIC][/SIGPIC]
-
04-08-2021, 03:19 PM #6
- Join Date
- Jul 2019
- Posts
- 264
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Funny. We got our rig back early from the shop..just got home and first thing was to measure that box. Per my PM, my driveway has a significant drop (my pin is roughly 4 feet off the ground to give you an idea), so getting good numbers takes some interpolation. With the standard awning (sticks out above the roofline), you need every bit of 12 feet of clearance. Also, if you have serial number, you can call customer service and they could give you some solid numbers. I called them today to get info on an inverter and got through in less than five minutes. Also, with it being tight to your proposed structure, you need to consider how level you can keep the rig on your truck, and clearance to disconnect. I pulled my rig out of indoor storage last month and the top of my front AC barely cleared the open overhead garage door
My wife is too short to open the...
Today, 11:10 PM in General Discussion