User Tag List
Thanks: 0
Likes: 0
Results 11 to 13 of 13
Thread: Bedroom TV 337RLS
-
04-08-2021, 08:25 PM #11
- Join Date
- Mar 2021
- Posts
- 261
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Malco1,
I appreciated the information. I will look into.
Dutchman2
-
05-01-2021, 08:18 AM #12
- Join Date
- Mar 2021
- Posts
- 261
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Malco1/Second Chance,
I moved the Companion Hitch forward 2" from the furthest back location. This place the pin slightly in front of the axel based on visual line up. Hooked up the FW and traveled about 80 miles. We were very surprised at the reduction in chucking. 97% gone as we crossed over bridges etc. Very noticeable difference. Not completely gone, but we can live with it. No worst than the TT we had before. I have also ordered a set of Timbren's to add TV stability.
Thanks for all the feedback!
Dutchman2
-
05-29-2021, 10:09 AM #13
- Join Date
- Mar 2021
- Posts
- 261
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Malco1,
Just finished a 2,400 mile trip with the Timbrens installed on our GMC 2500HD. Very noticeable stability increase. We had 25-35mph constant crosswind on both days of traveling in and out of Colorado. The increased stability was a confidence booster. Overall ride quality was very close to OEM with typical road conditions. I will say that on sever compression bumps you know there is additional support in the rear. Truck squatted only 1 3/4" in the rear vs. the 2.5" recorded prior to installation. Truck is level now front to rear with the 337RLS hooked up. Unloaded there is no ride quality issue at all as they are not engaged with the bump stop on the axel. There is @1.5" of clearance unloaded. Money well spent. They are staying installed.
Dutchman2
Need help with Imagine 2600 RL
Today, 10:46 AM in General Discussion