User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6
  1. #1
    Setting Up Camp
    Join Date
    Jan 2020
    Location
    Kansas
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Lippert Level Up issues

    Looking for information / advice on the level up system. My system was working fine a few weeks ago but yesterday I tried to turn it on and nothing happened on the touch panel, no power, no LCD ....nothing. I know there's been some issues and have done some preliminary trouble shooting but so far no results. I unplugged the touch panel as suggested in another forum and left it unplugged for about 20 minutes, plugged it back in..still nothing. I have fully charged batteries, and checked a 10 amp in line fuse which was okay, so now I'm looking for other trouble shooting suggestions or information that might be helpful.....Thanks.

  2. #2
    Site Sponsor
    Join Date
    Mar 2017
    Location
    Cedaredge, CO
    Posts
    1,298
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    If no power to the panel, you will have to start tracing wires backward to find where it is broken/or parted. I would test the fuse first, some times they look OK but are not. Then look for areas where the wiring could get moved about.
    2018 Solitude 375 RES 2022 F450 Powerstroke Dually

  3. #3
    Setting Up Camp
    Join Date
    Jan 2020
    Location
    Kansas
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Dick Noble View Post
    If no power to the panel, you will have to start tracing wires backward to find where it is broken/or parted. I would test the fuse first, some times they look OK but are not. Then look for areas where the wiring could get moved about.
    Okay, thanks very much!

  4. #4
    Paid my dues 😁 FT4NOW's Avatar
    Join Date
    Sep 2016
    Posts
    4,570
    Mentioned
    136 Post(s)
    Tagged
    0 Thread(s)
    Is your battery disconnect switch in the correct position?

    Do any other 12v items work?

    Sent from my SM-G950U using Tapatalk
    2023 Momentum 398M-R
    2023 Ford F-450

    SOLD - 2021 Reflection 311BHS
    SOLD - 2017 Momentum 399TH

  5. #5
    Setting Up Camp
    Join Date
    Jan 2020
    Location
    Kansas
    Posts
    23
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by FT4NOW View Post
    Is your battery disconnect switch in the correct position?

    Do any other 12v items work?

    Sent from my SM-G950U using Tapatalk
    Yes, I've doubled checked both the battery disconnect and my other 12 volt items do work.

  6. #6
    Paid my dues 😁 FT4NOW's Avatar
    Join Date
    Sep 2016
    Posts
    4,570
    Mentioned
    136 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by [email protected] View Post
    Yes, I've doubled checked both the battery disconnect and my other 12 volt items do work.
    Strange. I'd agree that you need to start tracing wires. I'd pull off the false wall in the basement and start by checking the wires going to to the main control module for 12v and go from there.

    Actually, I want to clarify, is this the One Control system or just the touchpad that controls the landing gear? If just landing gear, I'd start at the pad and work my backwards until you can get to the source or the controller.

    Sent from my SM-G950U using Tapatalk
    2023 Momentum 398M-R
    2023 Ford F-450

    SOLD - 2021 Reflection 311BHS
    SOLD - 2017 Momentum 399TH

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.