Lippert Screen Defender Doesn't Fit 2021 310GK

[brandtb1919]

Has anyone else out there tried to put one of the Lippert Screen Defender products on their screen door?

I purchased the largest one they have and it is too narrow by about 3/8 of an inch.

I don't think I am missing anything here and Lippert has not been any help. It seems like GD has used a non-standard size door or something? I'll try to talk to GD next.

Thanks!

[geotex1]

Should be a sticker on your door edge somewhere with exact model information. Get that and call Lippert to discuss. I made ours so can only offer this advice.

[brandtb1919]

Should be a sticker on your door edge somewhere with exact model information. Get that and call Lippert to discuss. I made ours so can only offer this advice.

Thanks for the feedback, I tried that and they told me to use the one I already had that is too small.

I'll have to take a closer look at the door next time it is out of storage and see if there is anything odd about how it's built.

May end up making my own as well.