50amp locking 90 degree f to 50amp locking male adapter??

[larryi]

Does anyone use on their 50amp service a locking 90 degree female to locking straight male adapter plug? I am trying to find a short adapter cord I can use to help with strain relief of the heavy straight 50amp cord pulling on the outlet on the side of the trailer. On my last FW the plug started pulling out of the side of the wall from the weight and strain, i'd like to find a 90 degree adapter to minimize that strain and if possible find locking on both ends to help keep it drier. If you have found them, where? Who makes it? Model number? Thanks in advance.

[larryi]

I found it myself, Camco 55572, I thought I had seen them around. Thanks

[pfd278]

Bought one of those, was loose in plug to trailer, and plastic ring would not stay tight. Ended up returning it.

[xrated]

Here's another idea and the cost is much cheaper. A piece of nylon 5/16 or 1/4 cord, tie a bowline for the top and a slip knot for the cord. Adjust as needed. It works really well and almost free...and no holes drilled anywhere.

[Keebler]

I found it myself, Camco 55572, I thought I had seen them around. Thanks

I have that exact model and I am very pleased with it; have been for 4 seasons now. I have heard of others having issues with it not being vertical when locked in; mine installs correctly and properly takes the strain off that plug. I've also read of someone having one short on them (I think that was the case).