Add compass connect after the fact?

[Heavysledz]

It definitely is a nice feature I just would rather have the valuable space they robbed to put it in
If it would warm up again here I am going to attempt a fix


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

Not sure what you mean...what space did you lose? The control panel is the same size as the non-Compass connect control panels and the Unity control module is buried in a location that wouldn't make any useful storage space (at least on the 2250RK).

[NB Canada]

Not sure what you mean...what space did you lose? The control panel is the same size as the non-Compass connect control panels and the Unity control module is buried in a location that wouldn't make any useful storage space (at least on the 2250RK).

This is where mine is. In the entry way cabinet. They took about 2/3 of the cabinet and mounted the module then covered it with a panel rendering that space useful for a few hats
You can see this space on older model 2400 and 2800 units

I am going to unscrew it and push it up flush with the ceiling and re attach it. Hopefully



2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Heavysledz]

This is where mine is. In the entry way cabinet. They took about 2/3 of the cabinet and mounted the module then covered it with a panel rendering that space useful for a few hats
You can see this space on older model 2400 and 2800 units



2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

Well that is lame....have you tried to see how much slack is in the wire bundle going into the roof? you may have enough to slide it back 6"to a foot or more. Another option would be to unscrew the frame from the exterior wall and flip it up so that it sits almost flush with the ceiling and reattach it....this would free up all of the space beneath it....What is on the other side of the interior wall on the left in your picture? Do you have access to that space from that side?

[NB Canada]

Well that is lame....have you tried to see how much slack is in the wire bundle going into the roof? you may have enough to slide it back 6"to a foot or more. Another option would be to unscrew the frame from the exterior wall and flip it up so that it sits almost flush with the ceiling and reattach it....this would free up all of the space beneath it....What is on the other side of the interior wall on the left in your picture? Do you have access to that space from that side?

Yea that is what I am hoping to do is place it up flush with the ceiling. Tons of lose wire there and as you can see it all exits from that hole in the ceiling
Hopefully there isn’t an issue in how it sits. Can’t imagine

The TV is to the left


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Heavysledz]

Yea that is what I am hoping to do is place it up flush with the ceiling. Tons of lose wire there and as you can see it all exits from that hole in the ceiling
Hopefully there isn’t an issue in how it sits. Can’t imagine

The TV is to the left


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

It sounds like it shouldn't be too difficult to raise it up as long as you can get your arms in there far enough to reach! Be sure to post pics if you decide to tackle this project....I am sure many others would love to do this too but want to see someone else do it first.

[AZMike]

Can’t imagine

Pun intended?

[NB Canada]

Not the best but it is out of the way. The issue is I had to do it all with one hand. Took some doing getting the 2 plus feet of 20 plus wires to behave



2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Ynot4me2]

Not the best but it is out of the way. The issue is I had to do it all with one hand. Took some doing getting the 2 plus feet of 20 plus wires to behave



2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

I'd say that turned out great, specially for one handed. It should have been like that out of the production line. Now you've gained a little more storage.

[Heavysledz]

good job of finding a bunch of usable storage space!