Awesome GPS mount for Superduty

**brandtb1919** · 03-24-2021, 08:26 PM

I finally found a better way to mount the GPS and TireMinder in my 2019 Superduty.

It starts with a Builtright Industries dash mount for 2017+ Ford Trucks:
https://www.builtrightind.com/produc...17-f-250-f-350
I originally saw this on a video from the Big Truck Big RV guy on Youtube. He shows how to install it as well. Took about an hour.

Click image for larger version.

Name: Mount.jpg
Views: 16
Size: 30.8 KB
ID: 32918

I then designed and 3D printed an adapter to mount the Garmin holder to the mount, and modified the TireMinder mount by removing the suction cup and drilling a hole for a screw. All solid as a rock.
The Garmin holder had four M2 threaded bosses on the bottom to mount the printed adapter. I would be happy to share the .stl files with anyone.

Click image for larger version.

Name: PXL_20210324_232825659.jpg
Views: 18
Size: 98.0 KB
ID: 32919

Click image for larger version.

Name: PXL_20210324_232557552.jpg
Views: 18
Size: 92.2 KB
ID: 32920

Click image for larger version.

Name: PXL_20210324_232550797.jpg
Views: 17
Size: 92.5 KB
ID: 32921

**traveldawg** · 03-24-2021, 09:04 PM

Nice! Thanks! I kind of mocked up something like that with plexiglass which is working fine. But I like that bracket better.

Now you need to add some USB ports up there....

Click image for larger version.

Name: F2C524A5-423B-4F74-AEC9-14D532912922.jpg
Views: 17
Size: 1.03 MB
ID: 32923

**MoonShadow_1911** · 03-25-2021, 07:51 AM

Originally Posted by brandtb1919

I finally found a better way to mount the GPS and TireMinder in my 2019 Superduty.

It starts with a Builtright Industries dash mount for 2017+ Ford Trucks:
https://www.builtrightind.com/produc...17-f-250-f-350
I originally saw this on a video from the Big Truck Big RV guy on Youtube. He shows how to install it as well. Took about an hour.

I then designed and 3D printed an adapter to mount the Garmin holder to the mount, and modified the TireMinder mount by removing the suction cup and drilling a hole for a screw. All solid as a rock.
The Garmin holder had four M2 threaded bosses on the bottom to mount the printed adapter. I would be happy to share the .stl files with anyone.

This is exactly what I have. I have my CB radio and my Ram Mount X-Mount for my phone mounted there!

Sent from my phone using Tapatalk

**brandtb1919** · 03-25-2021, 09:00 AM

Originally Posted by traveldawg

Nice! Thanks! I kind of mocked up something like that with plexiglass which is working fine. But I like that bracket better.

Now you need to add some USB ports up there....

I agree on the USB ports. It's bad enough that I have 4 screens, I don't want USB wires all over the place as well!