Auto level

[Skijobe]

2019 337 Reflection auto level always leaves right side (RV door side) tires off the ground about 1/4”. We start always on level ground. Any suggestions will help

[Fivecodys]

2019 337 Reflection auto level always leaves right side (RV door side) tires off the ground about 1/4”. We start always on level ground. Any suggestions will help

There is a whole section dedicated to leveling systems here: https://www.mygrandrv.com/forum/foru...veling-Systems
Check it out. It has been very helpful to me.

Best wishes,

[Always Learning]

2019 337 Reflection auto level always leaves right side (RV door side) tires off the ground about 1/4”. We start always on level ground. Any suggestions will help

Manually level the rig then reset the zero point on your leveling system. You can google your level system and resetting the zero point for the detailed steps. Not hard to do.

[SGT ROC]

Manually level the rig then reset the zero point on your leveling system. You can google your level system and resetting the zero point for the detailed steps. Not hard to do.

+1 not hard at all.

[Bungy]

2019 337 Reflection auto level always leaves right side (RV door side) tires off the ground about 1/4”. We start always on level ground. Any suggestions will help

Is the unit level at that point (check with a carpenters level)? If not, manually level the trailer then reset level as per above.

[huntindog]

You may want to check your sensors to make sure they are securely mounted. My rear one had the screws stripped and it was just floating around loose in the underbelly. Once I remounted it on the bracket it was suppossed to be on, it now works perfect everytime.
I see no reason why a unit should lose it's calibration if the sensors haven't moved. Recalibrating it if the sensors are loose would be a waste of time. As soon as the coach hits a bump and the sensor moves again, it will not work properly again