User Tag List
Thanks: 0
Results 11 to 17 of 17
Thread: Shower head replacement
-
04-04-2021, 02:44 AM #11
- Join Date
- Mar 2021
- Location
- New England
- Posts
- 77
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thank you! I'll check it out.
-
04-04-2021, 02:45 AM #12
- Join Date
- Mar 2021
- Location
- New England
- Posts
- 77
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thank you for your input.
-
04-04-2021, 02:55 AM #13
- Join Date
- Mar 2021
- Location
- New England
- Posts
- 77
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thank you.
-
04-09-2021, 05:55 PM #14
- Join Date
- Oct 2020
- Posts
- 12
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I have had great luck with this one. https://www.amazon.com/PIH-Pressure-...s%2C437&sr=8-5
-
04-11-2021, 05:00 PM #15
- Join Date
- Mar 2021
- Location
- New England
- Posts
- 77
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thanks adam9britt!
-
04-11-2021, 05:31 PM #16
- Join Date
- Apr 2020
- Posts
- 335
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
We went with the Oxygenics Fury for a few reasons. First, you use less water. the shower head that comes with GD units uses 2.5 gallons per minute while the Oxygenics uses 1.8 gallons per minute. That's significant if you don't have a water hookup. Second, the shut off on it can be varied. Meaning it can be on, off or any point in between. Third, the Fury unit has 6 different shower settings unlike their other models. But the hose is very stiff. I kept the original hose because it was a lot more flexible and stayed against the wall rather than out in the middle of the shower and in the way.
Here's a tip. If you only have a shower and have a Dura faucet that only has the hot and cold handles with the diverter between them and no spout, make sure you use the thicker washer (1/8" thick) at the shower head and the thinner washer (1/16" thick) at the diverter. If you switch them by mistake like I did, the diverter flapper gets blocked and you get very poor water flow. It took me a while to figure out why I was having water flow issues.
-
04-14-2021, 06:03 AM #17
- Join Date
- Mar 2021
- Location
- New England
- Posts
- 77
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thanks so much RobWNY. This is great information!
Trying to get trailer camera wire...
Yesterday, 10:01 PM in Electronics