Low back end of trailer

[Russellboy]

We have a 2670MK imagine. Does any body else have problems with the rear of trailer scraping their driveway? Our drive is not sloped much at all but on maiden trip it scraped and tore off spare tire and bent rear stabilizers. Took both off and now lay 2x4s down each time we back in or pull out. Does anybody have a solution for this problem? Hope so. Thanks, Mike

[Ynot4me2]

Your tt is longer then ours so all I can do is try to help but I'm sure others with the same tt will chime in soon. When hitched, are you nose high?

Sent from my SM-P610 using Tapatalk

[NB Canada]

We have a 2670MK imagine. Does any body else have problems with the rear of trailer scraping their driveway? Our drive is not sloped much at all but on maiden trip it scraped and tore off spare tire and bent rear stabilizers. Took both off and now lay 2x4s down each time we back in or pull out. Does anybody have a solution for this problem? Hope so. Thanks, Mike

Well there isn’t any way to change it

It is imperative that the trailer is level when hooked to the tow vehicle and when it is if it hits you need to change your driveway


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Russellboy]

No. Pick up actually sags a bit . I also carry wood along camping. Had numerous people look at it. Can not flip the axles. I know my axles are pretty far front. Drive does not have much of a slope but just enough.

[Tigger1]

We have a 2670MK imagine. Does any body else have problems with the rear of trailer scraping their driveway? Our drive is not sloped much at all but on maiden trip it scraped and tore off spare tire and bent rear stabilizers. Took both off and now lay 2x4s down each time we back in or pull out. Does anybody have a solution for this problem? Hope so. Thanks, Mike

There’s a couple in our camping group who have this problem. He attached two skid wheels to the back of the trailer and claims it works. You can do a google search for them.

Your idea of 2x4s is good. We have used a 2x8 in the past for another trailer that sat low and it worked. Another idea is to approach your drive at an angle if possible. I have also heard of adding lifts to the axles but don’t have any further knowledge.

[NB Canada]

No. Pick up actually sags a bit . I also carry wood along camping. Had numerous people look at it. Can not flip the axles. I know my axles are pretty far front. Drive does not have much of a slope but just enough.

I guess keep using the boards


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Scott'n'Wendy]

Some people have used these.
https://www.trailerblocks.com/
I have no personal experience with the product.

[Bungy]

We have a 2670MK imagine. Does any body else have problems with the rear of trailer scraping their driveway? Our drive is not sloped much at all but on maiden trip it scraped and tore off spare tire and bent rear stabilizers. Took both off and now lay 2x4s down each time we back in or pull out. Does anybody have a solution for this problem? Hope so. Thanks, Mike

Have no experience with them but could you use one of these: https://www.etrailer.com/Accessories.../LC407131.html ?

[NB Canada]

Have no experience with them but could you use one of these: https://www.etrailer.com/Accessories.../LC407131.html ?

Oh my days???? 840 bucks for 12 plates and some bolts???

That is insane


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Ynot4me2]

Lots of the large Momentum owner use the rollers that was mentioned earlier and from what I've read, they were pretty satisfied and almost called it a must.

Sent from my SM-P610 using Tapatalk