Hi Folks, the Lippert Max Flow Water Pump on our 2018 310GK stopped working. It was working fine when we brought it home. The last thing I did was sanitize the fresh water tank. I set the Nautilus panel knobs to draw in the bleach and filled the tank with water. I then ran the pump to run the solution through the lines. I let it sit overnight. Worked fine.

The next morning, the pump would not work. I've checked and rechecked the knobs on the Nautilus panel and no luck. The pump light is on on the main panel in the trailer.

I checked the voltage at the pump by removing the fuse and I have 13.7 volts. BTW, I figured out the pump switch on the Nautilus panel is a 2-way switch.

Any ideas?