User Tag List
Thanks: 0
Likes: 0
Results 11 to 20 of 20
-
04-06-2021, 05:05 PM #11
- Join Date
- Feb 2021
- Location
- Star, ID
- Posts
- 291
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
-
04-07-2021, 12:44 AM #12
- Join Date
- Feb 2021
- Posts
- 23
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
04-07-2021, 11:52 AM #13
- Join Date
- Feb 2021
- Posts
- 23
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
So, as always, the real test is how it works, right? I'm happy to report that my TST TPMS is working great with the repeater installed. If anyone uses the docking station to mount a cut off switch, I would recommend using a step drill bit and drill it in a vise. The plastic of the docking station grabs badly when using a large standard drill bit. Happy Trails!
Sent from my SM-G998U using Tapatalk
-
04-07-2021, 12:24 PM #14
- Join Date
- Feb 2021
- Location
- Star, ID
- Posts
- 291
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
why didn't you just remove the TireLinc dock all together and just mount a stand alone switch and the TPMS repeater in place of it?
Jeff and Debbie
2021 Imagine 2250RK
2015 Ram2500 Laramie CC 6.7 Cummins Diesel w/air-ride auto leveling
USMC Veteran
-
04-14-2021, 03:14 PM #15
How much slack did you find on the 12v wires behind the TireLinc? I'm doing this exact project on my 22MLE and when I pulled the dock off to take an initial look, it seemed like there was no extra length on the wiring at all. Did you solder your switch wires or was there enough length to do twist caps?
2020 F-150 4x4 SuperCrew 3.5L V6 EcoBoost
2021 Grand Design 22MLE Imagine XLS
Blue Ox SwayPro WDH
-
04-14-2021, 08:31 PM #16
- Join Date
- Feb 2021
- Posts
- 23
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
You're right. Only about 2" of wire. We used wire nuts to connect. Works great! Good luck. It's pretty awkward working on the wiring and such while you're hanging out of the storage compartment!
Sent from my SM-G998U using Tapatalk
-
04-16-2021, 03:15 PM #17
- Join Date
- Sep 2020
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
mine is working great used it on two Long trips
2600rb
-
07-09-2023, 03:17 PM #18
- Join Date
- Jul 2023
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I have a 2023 295RL Reflection. The Tire Trac repeater just quit. The instructions say to check the “in-line “ fuse but that is nowhere to be found. Looks like the 12 volt wiring goes into the battery compartment area and connects to other power wiring. Based on comments here should I just trash this system and change? Thx all!
-
07-10-2023, 08:11 AM #19
- Join Date
- May 2021
- Posts
- 336
- Mentioned
- 8 Post(s)
- Tagged
- 0 Thread(s)
Have you used a multi-meter to check and see if there is 12v on the wires? If no, look for a fuse/loose connection, if yes you can move on to whatever step the instructions have next.
Also, this thread is over 2 years old so you might want to consider starting a new one if you don't get many replies.
Good luck.2021 Imagine XLS 22RBE
2021 Ram 2500 Hemi, Crew Cab Short Bed
2-206 AH SOK Batteries, Victron MultiPlus 3000VA Inverter, 800 watts solar
-
07-15-2023, 11:37 AM #20
- Join Date
- Jul 2023
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
There was voltage to the repeater module; turns out that the plug-in repeater was faulty. Here's the interesting follow-up with Lippert. Even though the TireLink was still under warranty, I had to pay a $165 charge for a replacement module (which is backordered). When I receive it, I have to call Lippert again and request a claim form and a return authorization number to return the faulty receiver. Then they will process my claim to refund the $165!!!!
actual offset of Curt Crosswing
Today, 05:34 AM in Fifth Wheel Hitching Topics