User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: Front Too Low Error
-
09-24-2023, 10:50 AM #1
- Join Date
- Aug 2023
- Location
- Grass Valley, CA
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Front Too Low Error
2024 Solitude 310GK.
I parked my 310 still attached to the truck on a slight paved incline of my driveway to do some maintenance on the parking location.
Front of the trailer is faced downhill.
Trailer attached to the truck and I lowered the front jacks to take weight off the truck for overnight storage.
This am while attempting to retract the front jacks I get FRONT TOO LOW error.
I then pumped my truck air bags too max which did not resolve the error.
Front too low error screen flashes to PRESS OK TOO ACKNOWLEDGE.
Pressing OK does not resolve the issue.
Any ideas?
Mark
-
09-24-2023, 11:59 AM #2
- Join Date
- Aug 2023
- Location
- Grass Valley, CA
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Found resolution.
I decided to initiate Zero Point Calibration long enough to retract the front legs.
I will reset the Zero again once I get back on a more level pad.
I live in the Sierra foothills and level ground is rare here.
Washing machine on/off valve
Today, 04:24 PM in Plumbing and Water Systems