User Tag List
Results 11 to 20 of 29
-
04-13-2021, 06:44 AM #11
- Join Date
- Jun 2018
- Location
- San Antonio Tx
- Posts
- 1,648
- Mentioned
- 19 Post(s)
- Tagged
- 0 Thread(s)
When I had my Sailuns installed I took them to a local truck tire shop that balanced the Westlakes last year. They also struggled with getting the Westlakes off and even more so getting the Sailuns on. These G rated trailer tires are pretty darn stiff in the sidewall area. They wanted to use truck tire irons because their typical tire mounting machine couldn't do it. I said no way, that would damage the rims. They used 3 guys to help on the machine and it still took 3 hours to swap over 5 Sailuns, no rim damage though. Your damage is from using tire irons, sorry it happened.
2019 Solitude 375RES Onan 5500 Splendide W/D Samsung res. fridge
2020 Ford F450 Platinum dually 6.7L 4:30 gears
B&W Companion for Ford puck system 20K lbs
Jeff
-
04-13-2021, 06:58 AM #12
- Join Date
- Dec 2019
- Posts
- 170
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
For one the valve stems are NOT what is required for high pressure.. ALL metal screw on is ALL that should have been put on and they owe you new rims ... I have a tire changer here at the house and change tire all the time and this is below amateur work
-
04-13-2021, 07:56 AM #13
- Join Date
- Mar 2018
- Posts
- 182
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Oh swell, I had no idea about snap-in valve stems. They mentioned replacing the valve stems and used a high pressure stem... clearly not high pressure enough. I went with the same size as the OEM tire and same rating.
I'm glad you said something. I just searched for snap-in valve stems, and haven't found one rated for > 100psi either.
Now I'm really2018 Solitude 344gk
2021 Ram 3500 SRW
-
04-13-2021, 08:09 AM #14
- Join Date
- Nov 2017
- Location
- Toronto, Canada
- Posts
- 1,974
- Mentioned
- 54 Post(s)
- Tagged
- 0 Thread(s)
We had a tire repaired at roadside by a tire specialist who seemed to know what he was doing. After struggling for long minutes to get the tire off the rim so he could repair it, he advised that he'd have to get rough with it and might damage the rim. He pulled out some really big irons and did get it off. Did some visible damage, but nothing nearly as severe as that in your photo.
Good luck in your battle.Mark - 2018 Solitude 310GK - 2017 F-350 diesel SRW short box - Pullrite Superglide hitch
-
04-13-2021, 11:34 AM #15
- Join Date
- Mar 2018
- Posts
- 182
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
I'm in the Albany NY area. I went to 3 different tire shops before I could find someone willing/able to install these G rated tires.
I've sent the company an email with well documented photos of all 4 wheels. They called back and stated the job was difficult and had to use bars. Offered to refund my mounting fee.
I declined the refund and will continue to work with them on new wheels.
Oh, called multiple tire shops. NO ONE can do these wheels with the standard tire machine.
Why is this such a nightmare?
How do shops that are capable complete this job?
Is there a different machine that is needed that most shops just don't have?
I'm a bit beside myself here.2018 Solitude 344gk
2021 Ram 3500 SRW
-
04-13-2021, 11:50 AM #16
- Join Date
- Jun 2018
- Location
- San Antonio Tx
- Posts
- 1,648
- Mentioned
- 19 Post(s)
- Tagged
- 0 Thread(s)
@bfs673 what part of the country are you in? Have you called truck tire shops or a trailer dealer? Dealers that sell horse trailers, gooseneck car hauler trailers etc often have the equipment to mount the G tires. The place I used had an old clapped out tire machine like the ones you see at Discount Tire or Walmart tire shops etc. It was worn out and barely mounted to the floor lol but that's why it took 3 guys to hold the tire and the machine. They heavily soaped the tire bead and that poor old machine got it done with no damage. They use tire irons on the big semi tires because those guys could care less about a scraped up rim. I would call the truck tire shops or equipment / construction trailer dealers in your area. Good luck to you man! Here's mine after the Sailuns were mounted, no damage to rim.
Last edited by Txfivver; 04-13-2021 at 11:54 AM.
2019 Solitude 375RES Onan 5500 Splendide W/D Samsung res. fridge
2020 Ford F450 Platinum dually 6.7L 4:30 gears
B&W Companion for Ford puck system 20K lbs
Jeff
-
04-13-2021, 11:53 AM #17
- Join Date
- Apr 2017
- Posts
- 1,101
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
2021 Solitude 375 RES-R
2024 GMC Denali ultimate DRW
-
04-13-2021, 12:05 PM #18
- Join Date
- Mar 2018
- Posts
- 182
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Good idea on the commercial trailer shops. I've tried calling my local RV shop, and were not very helpful. They outsource to a local shop, called the shop and they weren't really sure what I was talking about, and had no input on the snap-in valve stem; everything I've read so far leads me to believe this is bad.
Have calls into other larger RV shops in the area; we'll see what they say.2018 Solitude 344gk
2021 Ram 3500 SRW
-
04-13-2021, 12:07 PM #19
I can only speculate the shops are very small and/or cater to just average passenger tires. If so, the machines they use are painfully basic, but a skilled user can still use them without butchery! The issue is large diameter with stiff sidewall. This is not a common automotive combination and even machines for run-flats aren't correct because of the overall diameter involved. That said, I've never seen a shop that sells serious 4x4 tires not have a more advanced tilt arm machine with assist. The local chain joint here has made it no-brainer with Hunter Revolution machines. The truck and trailer shop I go to, uses a heavy duty machine (635HD) which is super convenient and easy to use (yes, I have) and between tulip clamp and the hook, there's no damage! Imagine telling a burly trucker you've torn up his 22.5 or 24.5 inch mirror polished Alcoas because it was hard...
Rob & Nikki + Cloverfield
2020 Grand Design Solitude S-Class 3350RL
2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN
Mountains of Pennsylvania
-
04-14-2021, 11:23 AM #20
- Join Date
- Mar 2018
- Posts
- 182
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
I am pleased to note the repair facility has taken full responsibility for the damage and has ordered all new wheels for the trailer.
The GM for the company (they have multiple locations) reached out today to discuss as well.
They are also investigating use of the snap-in valve stem; something they claim are used in semi-trucks that they work on. I've requested they only use an appropriate all metal valve stem, They've agreed to reach out to Grand Design to identify and source the OEM component used when sold new.
Their next challenge is to find one of their larger and more experienced locations to move the tires onto a new wheel. The GM mentioned he will personally work this issue and remain involved to ensure the process goes as it should.
I'll report back when completed; but so far I'm very pleased with their response!
Accidents/screw ups happen; that's when you find out a companies customer service position!2018 Solitude 344gk
2021 Ram 3500 SRW
What changed for the new GD...
Today, 02:39 PM in General Discussion