30 amp main breaker

[Bahamas1963]

We are in our maiden voyage with our 2021 GD Imagine 2600rb. Love the trailer but this morning we had TV, coffee pot and electric griddle on. Lost power and while checking breakers turned off the main 30 amp. The 30 amp breaker at electric pedestal outside had tripped. I reset outside but the 30 amp inside trailer will not reset. Any ideas or am I missing something?? New to this trailer. Any help greatly appreciated if it is a simple task. Thanks, Rob

[NB Canada]

The trailer shouldn’t need to be “reset” if it didn’t trip


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[NB Canada]

I run a separate extension cord to the 15 amp pedestal to run my coffee maker
A griddle and a coffee maker could possibly be using 3000 watts. A lot of draw
Something to consider next time


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[Bahamas1963]

Next time I will do differently. What I’m trying to figure out is the main 30 amp breaker does not reset. It is not feeling like it is engaging like a breaker should. Didn’t know if I’m missing something. Thanks

[NB Canada]

Next time I will do differently. What I’m trying to figure out is the main 30 amp breaker does not reset. It is not feeling like it is engaging like a breaker should. Didn’t know if I’m missing something. Thanks

Maybe unhook from the pedestal and try to cycle the breaker inside again
Pretty simple systems. Wouldn’t think the breaker would have failed but anything is possible

Check gfci as well


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[xrated]

Next time I will do differently. What I’m trying to figure out is the main 30 amp breaker does not reset. It is not feeling like it is engaging like a breaker should. Didn’t know if I’m missing something. Thanks

Just in case you don't know (maybe you do), you can't just turn the breaker off, then back on. Once you turn it off, keep pushing in that same direction until the breaker handle will NOT move anymore, then turn it back on. That is what actually resets the breaker.

[Ynot4me2]

Does your tt have a hardwire surge protector? This would have been added on by the dealer or you. Is there even electricity at the pole? Even though you reset that breaker, there's another one down the line. This can be checked with a multimeter if you have one. Just trying to help you illuminate some possibilities.

[BobLandry]

My bet goes with the pedestal breaker not being correctly reset.

[Bahamas1963]

Thanks to all that replied. I removed the 30 amp main breaker as it did not feel like it was engaging like a breaker typically does when turning on. Squeezing with my left hand and moving lever with my right the breaker worked as it should. I will not touch this breaker again until I get home and talk with dealer. Apparently a bad breaker and will replace and get spare for 15,20 and 30 before next travels. Even brand new can have issues. Rob

[traveldawg]

Thanks to all that replied. I removed the 30 amp main breaker as it did not feel like it was engaging like a breaker typically does when turning on. Squeezing with my left hand and moving lever with my right the breaker worked as it should. I will not touch this breaker again until I get home and talk with dealer. Apparently a bad breaker and will replace and get spare for 15,20 and 30 before next travels. Even brand new can have issues. Rob

My reaction to carrying spare breakers is to not bother. Those things hardly ever fail. Especially after some short term use. They do go bad but not enough to carry spares. And usually, even in the most remote places, there is a hardware store somewhere nearby.

Now watch - one of mine will fail...!